Short answer: the AMS 2 Pro and AMS HT aren't two versions of the same product — they solve different problems. The AMS 2 Pro is a four-slot multi-colour system with built-in filament drying: the everyday choice for PLA, PETG, ABS and ASA. The AMS HT is a single-spool, high-temperature drying unit built for engineering filaments and the only clean way to feed soft TPU 95A. Multi-colour hobbyist: AMS 2 Pro. Engineering and flexibles: AMS HT. Serious users in humid Australian cities often end up running both.
What each unit actually is
The AMS 2 Pro is the successor to the original AMS: four spool slots, automatic switching for multi-colour and multi-material prints, RFID recognition of Bambu spools — and the headline upgrade, active heated drying, so the box that holds your filament also keeps it dry. If you've used an AMS before, it's the same workflow with the damp-filament problem designed out. (New to AMS entirely? Start with our AMS setup guide.)
The AMS HT takes the opposite approach: one spool, one job, done properly. It dries at substantially higher temperatures than the 2 Pro, accepts the high-temperature engineering materials a standard AMS was never built for, and adds a dedicated spool path that can feed flexible filament — something no four-slot AMS can do.
Compatibility: which printers take which
Both units work across the current enclosed Bambu Lab range — P1S, P2S, X1 series, X2D, and the H2 family including the H2S and H2D. Bambu Lab later added A1-series support via firmware, though the AMS Lite remains the A1's native companion — check the official Bambu Lab wiki for the current compatibility matrix for your exact printer and firmware. Multiple units can run on one printer through the AMS Hub, and yes, you can mix an AMS 2 Pro and an AMS HT on the same machine.
Drying: the underrated deciding factor in Australia
Most overseas reviews treat drying as a nice-to-have. In coastal Australia, where Sydney and Brisbane sit at 60–80% relative humidity for much of the year, it's the feature that decides print quality. Damp filament strings, pops and prints weak layers — our Australian filament storage guide covers just how fast spools drink moisture here.
The AMS 2 Pro dries at up to around 65 °C — ideal for PLA, PETG Basic and PETG HF, and it can dry while you print. The AMS HT reaches up to around 85 °C, which is what genuinely hygroscopic engineering materials need: think PAHT-CF, which must be dried before every serious print, or PPA-CF. If your “filament dryer” tops out at PLA temperatures, it can't properly service those materials — the HT can, and it doubles as a standalone dryer between prints.
Materials: where the line actually falls
The AMS 2 Pro handles the everyday stack: the whole PLA family (including Matte and Silk Multi-Color), PETG, ABS, ASA and support materials. For flexibles it takes exactly one: TPU for AMS, a semi-rigid Shore 68D formulation — about the feel of a hard suitcase shell — that's the only TPU stiff enough to survive a four-slot AMS feed path. Anything softer will buckle and jam.
The AMS HT is the high-end lane: carbon-fibre engineering filaments like PET-CF (notably printable without waiting on chamber heat-soak), PAHT-CF, PPA-CF and PPS-CF — all needing a hardened nozzle — plus Bambu's high-temperature reusable spool for drying at the top of its range. And it has the dedicated TPU outlet that feeds genuinely soft TPU 95A — tyre-tread flexibility, not suitcase-shell. For the even softer TPU 90A and TPU 85A (soft-shoe-sole territory), pair an external spool with the TPU Feed Assist Module on P1, X1, H2, P2S and X2D machines — it dramatically improves feed reliability and surface quality on soft TPU. One quick myth-bust while we're here: Shore hardness isn't bounce. If you want high rebound rather than squish, that's a different material class entirely — see BIQU PLA-HR high-rebound filament.
Side-by-side
| AMS 2 Pro | AMS HT | |
|---|---|---|
| Spool slots | 4 | 1 |
| Multi-colour printing | Yes — its core job | No (single spool) |
| Drying temperature | Up to ~65 °C | Up to ~85 °C |
| Everyday materials (PLA/PETG/ABS/ASA) | Excellent | Yes, but one at a time |
| Engineering CF filaments (PET-CF, PAHT-CF, PPA-CF, PPS-CF) | Not the right tool | Built for them |
| TPU support | TPU for AMS (68D) only | TPU 95A via dedicated outlet |
| Best for | Multi-colour + humid-climate everyday printing | Engineering materials + flexibles + serious drying |
So which should you buy?
If you print models, gifts, brackets and household parts in PLA, PETG, ABS or ASA and want colour changes without babysitting — the AMS 2 Pro, no hesitation. Its drying alone will fix half the stringing complaints we hear from coastal customers (the other half are covered in our stringing guide).
If you're moving into carbon-fibre engineering filaments, nylon-based materials, or functional flexible parts in TPU — the AMS HT is the one that actually unlocks those materials rather than merely tolerating them.
And if you're building a proper workhorse setup on a P2S or H2D: AMS 2 Pro for the colour work, AMS HT for the engineering spool of the week. That's how we run several of our own machines — we print every day, so this comparison comes from the workshop floor, not a spec sheet.
FAQ
Can the AMS 2 Pro print TPU?
Only Bambu Lab TPU for AMS, which is Shore 68D — semi-rigid, closer to a hard shell than a rubber band. Softer TPU (95A and below) will jam a four-slot AMS; feed it via the AMS HT's TPU outlet or the TPU Feed Assist Module instead.
Can I run an AMS 2 Pro and an AMS HT on the same printer?
Yes. On supported printers they connect alongside each other (via the AMS Hub where needed), so you can keep four colours loaded and dry while an engineering or TPU spool feeds from the HT. The maximum number of units depends on your printer model.
Does the AMS HT work as a standalone filament dryer?
Yes — and at up to ~85°C it dries materials that PLA-temperature dryers can't touch, like PAHT-CF and PPA-CF. Drying a spool overnight in the HT before a big engineering print is the single best insurance you can buy against weak, foamy layers.
Do I still need the AMS Lite if I have an A1?
The AMS Lite remains the A1 series' native multi-colour system. Bambu Lab has extended AMS 2 Pro and AMS HT support to the A1 series via firmware, but check the Bambu Lab wiki for the current requirements for your printer before buying — or ask us and we'll confirm for your exact setup.
Buy with local backup
3D BRO is an authorised Bambu Lab reseller and Australia's authorised Bambu Lab service centre, with the AMS 2 Pro, AMS HT and the full Bambu Lab range in stock at Regents Park, Sydney, and fast Australia-wide shipping. Stock up on filament while you're at it, or get in touch — we're happy to talk through your printer, your materials and which box (or boxes) actually make sense for you.
