Bambu Lab

Bambu Lab High Flow Tungsten Carbide Nozzle - H2/P2

$156.00
Tax included. Shipping calculated at checkout.

Apply
Nozzle Size: 0.4mm

Pickup availability at Regents Park Warehouse/Service Center

In-Store, Order now and collect anytime.

Pickup Availability
  • Regents Park Warehouse/Service Center
    In-Store, Order now and collect anytime.

    6 Rose Crescent
    Regents Park NSW 2143
    Australia

    (02) 9772 4315

Shipping & Returns
  • One Year National Warranty
  • Support by Bambu LabAuthorised Service Center
  • Free shipping over $99 (excludes 3D printers)
Nozzle Size

Print carbon fibre fast, and stop wearing out nozzles. This nozzle combines Bambu Lab's high-flow melt zone with tungsten carbide, so abrasive filaments don't chew through it and big prints finish sooner.

What you get

  • Lasts longer on abrasive filament. Tungsten carbide is HRA 90 hard versus 74 for hardened steel β€” Bambu Lab rates it at 50% longer life with fibre-reinforced filaments.
  • Up to 30% less print time*. Up to 40 mmΒ³/s with PLA Basic on the 0.4 mm, against 24 mmΒ³/s for the standard-flow nozzle.
  • Clean detail at speed. Consistent extrusion keeps edges crisp and surfaces smooth.
  • Quick swap. Unlock the latch and change it over β€” once it has cooled down.

Which size

  • 0.4 mm β€” everyday balance of speed and detail: toys, mechanical parts, decorative prints.
  • 0.6 mm / 0.8 mm β€” faster, for large structural and engineering parts, and the right choice for PLA-CF, PETG-CF, ASA-CF, PA6-CF, PAHT-CF and PA6-GF.

Compatibility

  • Printers: H2D (left and right), H2S, P2S, X2D. On the H2C it fits the left (lifting) hotend only.
  • Dual-nozzle printers: both nozzles need to be the same size.
  • Filaments: PLA, PETG, ABS, ASA, PC and TPU 95A HF on all sizes. PET-CF, PPA-CF and PPS-CF on the left (liftable) hotend only. Not for TPU 85A or 90A.
  • Max printing temperature 350 Β°C. In the box: 1 Γ— tungsten carbide nozzle.

Don't need the extra speed? The standard-flow Tungsten Carbide Nozzle has the same wear resistance.

*Bambu Lab test: PLA Basic, 15% infill, 300 Γ— 300 Γ— 300 mm cube, compared with the standard-flow nozzle. Results vary by model and settings.

Genuine Bambu Lab product from 3D BRO β€” Authorised Bambu Lab Reseller and First Authorised Bambu Lab Service Center (Australia).