Bambu Lab

Bambu Lab E1 Air Purifier

$299.00
Tax included. Shipping calculated at checkout.

Apply

Pickup availability at Regents Park Warehouse/Service Center

In-Store, Order now and collect anytime.

Pickup Availability
  • Regents Park Warehouse/Service Center
    In-Store, Order now and collect anytime.

    6 Rose Crescent
    Regents Park NSW 2143
    Australia

    (02) 9772 4315

Shipping & Returns
  • One Year National Warranty
  • Support by Bambu LabAuthorised Service Center
  • Free shipping over $99 (excludes 3D printers)

Print indoors without the smell. The Bambu Lab E1 Air Purifier connects straight to your printer's chamber and pulls fumes out as they're made β€” before they reach the room.

What you get

  • Fumes caught at the source. Suction creates negative pressure inside the enclosure, so fumes are drawn into the filter instead of leaking out.
  • Fine particles and odours filtered. Three stages β€” pre-filter, HEPA (up to 99.97% at 0.3 ΞΌm) and a 40 mm activated carbon layer with 0.45 kg of coconut-shell carbon.
  • Quiet enough to sit beside. As low as 38 dB in Quiet Mode.
  • Runs itself. On supported printers it starts when a print begins, matches its extraction to the material, and keeps running afterwards to clear the chamber.
  • Check it from your phone. Air quality shows in Bambu Handy and Bambu Studio, and you can adjust the E1 from either.

Compatibility

  • Full features (Auto and Manual Mode, control from the printer): H3C, H2S, H2D and P2S after a printer firmware update. On H2S and H2D, for 3D printing only.
  • Other enclosed Bambu Lab printers (H2C, X2D, X1 Series, P1 Series): Manual Mode only until compatible firmware is released.
  • Each printer needs a printed adapter piece β€” download the model for your printer from the Bambu Lab Wiki before installing.

Which filaments

  • Recommended: PLA, PETG, TPU.
  • ABS, ASA, PC, PA: fumes are reduced; Bambu Lab recommends the enhanced filter (sold separately) for these.

Good to know

  • For 3D printing fumes only β€” it must not be used for laser fume extraction.
  • It does not filter carbon monoxide or radon and is not safety equipment.
  • Leave 5 cm clear in front and 20 cm behind, and avoid kinking the hose.
  • Size 261 Γ— 182 Γ— 345.5 mm, 3.1 kg. Hose inner diameter 60 mm.

Genuine Bambu Lab product from 3D BRO β€” Authorised Bambu Lab Reseller and First Authorised Bambu Lab Service Center (Australia).