BIQU
BIQU Universal Turbo Kit
Pickup availability at Regents Park Warehouse/Service Center
In-Store, Order now and collect anytime.
-
Regents Park Warehouse/Service Center
In-Store, Order now and collect anytime.6 Rose Crescent
Regents Park NSW 2143
Australia(02) 9772 4315
Shipping & Returns
- One Year National Warranty
- Support by Bambu LabAuthorised Service Center
- Free shipping over $99 (excludes 3D printers)
Much stronger part cooling, without hanging a heavy fan off your toolhead. The BIQU Universal Turbo Kit is a remote blower kit: the blower mounts on the printer frame and feeds air to the toolhead through a tube.
What you get
- Serious airflow. A Wonsmart WS7040-24-V200 brushless blower, up to 45,000 RPM and 14.7 CFM.
- Control it your way. Run it from any fan port on your mainboard (3.3β24 V signal), or set the speed by hand with the included knob.
- Wiring made easier. BIQU's own adapter board and pre-made cables connect the blower driver to your printer.
- Quieter intake. An air intake filter is included, which also reduces noise.
Compatibility
- Power: 24 V DC.
- Firmware: BIQU gives fan settings for both Klipper and Marlin.
- Mounting: BIQU's guide and printable parts cover the Voron 2.4 and Trident. Other printers need your own mounts and duct.
Good to know
- In the box: WS7040-24-V200 blower, WS2403DY01V04 brushless driver, air intake filter, controller adaptor board, 1 m power cable, 1 m control signal cable, driver power cable, driver signal cable and potentiometer knob.
- Not included: the 15 mm CPAP tube and printed parts.
- The blower won't spin at very low duty cycles (below about 8%), so follow the fan settings in the BIQU Universal Turbo Kit guide.
- Mounting options that leave the blower unenclosed are noticeably louder.
Stocked in Sydney by 3D BRO.
