BIGTREETECH

BIGTREETECH TFT50 V3.0 3D Printer Touch Screen (Dual Operation System)

$125.00
Tax included. Shipping calculated at checkout.

Apply

Pickup availability at Regents Park Warehouse/Service Center

In-Store, Order now and collect anytime.

Pickup Availability
  • Regents Park Warehouse/Service Center
    In-Store, Order now and collect anytime.

    6 Rose Crescent
    Regents Park NSW 2143
    Australia

    (02) 9772 4315

Shipping & Returns
  • One Year National Warranty
  • Support by Bambu LabAuthorised Service Center
  • Free shipping over $99 (excludes 3D printers)

Swap a basic 12864 LCD for a bigger colour touchscreen β€” and keep the classic menu for when you want it. The BIGTREETECH TFT50 V3.0 is a 5-inch dual-mode display that works as either a touchscreen or a standard 12864 screen.

What you get

  • Two screens in one. Touch mode runs over a serial (RS232) cable. 12864 mode runs over the EXP ports and shows your printer's own menu. Hold the knob for about 3 seconds to switch.
  • Print from SD card or USB stick in touch mode.
  • Room to add more. Ports for a Wi-Fi module, a filament runout sensor (FIL-DET) and auto power-off after printing (PS-ON).
  • Easy updates. Copy the firmware to an SD card, insert it and reset.

Compatibility

  • 12864 mode: mainboards with EXP1 and EXP2, or the single EXP3-style connector used on E3 boards such as the SKR Mini E3 and SKR E3 DIP.
  • Touch mode: mainboards with a TFT or AUX-1 serial port.
  • Firmware: BIGTREETECH's open-source touchscreen firmware supports Marlin and RepRapFirmware.

Specifications

Resolution 480 Γ— 272
Display area 110.88 Γ— 62.83 mm
Board size 149 Γ— 77.5 mm
Mounting holes 141 Γ— 69.5 mm
Power DC 5 V

Good to know

  • 12864 mode has no touch β€” use the knob.
  • In touch mode, the baud rate must match between the screen and the mainboard firmware.
  • Wire it up with the printer powered off. Firmware and setup notes are on BIGTREETECH's GitHub.

Stocked in Sydney by 3D BRO.