BIGTREETECH
BIGTREETECH TFT43 V3.0 3D Printer Touch Screen (Dual Operation System)
Pickup availability at Regents Park Warehouse/Service Center
In-Store, Order now and collect anytime.
-
Regents Park Warehouse/Service Center
In-Store, Order now and collect anytime.6 Rose Crescent
Regents Park NSW 2143
Australia(02) 9772 4315
Shipping & Returns
- One Year National Warranty
- Support by Bambu LabAuthorised Service Center
- Free shipping over $99 (excludes 3D printers)
Swap a basic 12864 LCD for a colour touchscreen β and keep the classic menu for when you want it. The BIGTREETECH TFT43 V3.0 is a 4.3-inch dual-mode display that works as either a touchscreen or a standard 12864 screen.
What you get
- Two screens in one. Touch mode runs over a serial (RS232) cable. 12864 mode runs over the EXP ports and shows your printer's own menu. Hold the knob for about 3 seconds to switch.
- Print from SD card or USB stick in touch mode.
- Room to add more. Ports for a Wi-Fi module, a filament runout sensor (FIL-DET) and auto power-off after printing (PS-ON).
- Easy updates. Copy the firmware to an SD card, insert it and reset.
Compatibility
- 12864 mode: mainboards with EXP1 and EXP2, or the single EXP3-style connector used on E3 boards such as the SKR Mini E3 and SKR E3 DIP.
- Touch mode: mainboards with a TFT or AUX-1 serial port.
- Firmware: BIGTREETECH's open-source touchscreen firmware supports Marlin and RepRapFirmware.
Specifications
| Resolution | 480 Γ 272 |
|---|---|
| Display area | 95.04 Γ 53.86 mm |
| Board size | 143.65 Γ 67.25 mm |
| Mounting holes | 135.65 Γ 59.25 mm |
| Power | DC 5 V |
Good to know
- 12864 mode has no touch β use the knob.
- In touch mode, the baud rate must match between the screen and the mainboard firmware.
- Wire it up with the printer powered off. Firmware and setup notes are on BIGTREETECH's GitHub.
Stocked in Sydney by 3D BRO.
