BIGTREETECH

BIGTREETECH TFT35 E3 V3.0.1

$80.00
Tax included. Shipping calculated at checkout.

Apply

Pickup availability at Regents Park Warehouse/Service Center

In-Store, Order now and collect anytime.

Pickup Availability
  • Regents Park Warehouse/Service Center
    In-Store, Order now and collect anytime.

    6 Rose Crescent
    Regents Park NSW 2143
    Australia

    (02) 9772 4315

Shipping & Returns
  • One Year National Warranty
  • Support by Bambu LabAuthorised Service Center
  • Free shipping over $99 (excludes 3D printers)

Give your Ender 3 a colour touchscreen that fits where the stock screen sits. The BIGTREETECH TFT35 E3 is a dual-mode display designed to replace the original Ender 3 LCD, working as either a touchscreen or a standard 12864 screen.

What you get

  • Fits the Ender 3. Made to replace the original Ender 3 LCD. Board size 93 Γ— 87 mm.
  • Two screens in one. Touch mode runs over a serial (RS232) cable. 12864 mode shows your printer's own menu. Hold the knob for about 3 seconds to switch.
  • Print from SD card or USB stick in touch mode.
  • Room to add more. Ports for a Wi-Fi module, a filament runout sensor (FIL-DET) and auto power-off after printing (PS-ON).

Compatibility

  • 12864 mode: the EXP3 port matches the single display connector on E3-series boards such as the SKR Mini E3 V1.2 and SKR E3 DIP V1.1. EXP1 and EXP2 are there for standard mainboards.
  • Touch mode: mainboards with a TFT or AUX-1 serial port.
  • Firmware: BIGTREETECH's open-source touchscreen firmware supports Marlin and RepRapFirmware.
  • Power: DC 5 V.

Good to know

  • 12864 mode has no touch β€” use the knob.
  • This is the V3.0.1 board. BIGTREETECH's manual and firmware are published under the TFT35 E3 V3.0 name.
  • BIGTREETECH publishes separate firmware builds for the STM32 and GD32 versions of the TFT35 E3 V3.0 boards. Check which chip is on your board before updating. Firmware is on BIGTREETECH's GitHub.
  • To update, copy the firmware to an SD card, insert it and reset. Don't rename the firmware file.
  • Wire it up with the printer powered off.

Stocked in Sydney by 3D BRO.