BIGTREETECH

BIGTREETECH Raspberry Pad 5 For 3D Printer Voron v0 v0.1 v2.4

$155.00
Tax included. Shipping calculated at checkout.

Apply

Pickup availability at Regents Park Warehouse/Service Center

In-Store, Order now and collect anytime.

Pickup Availability
  • Regents Park Warehouse/Service Center
    In-Store, Order now and collect anytime.

    6 Rose Crescent
    Regents Park NSW 2143
    Australia

    (02) 9772 4315

Shipping & Returns
  • One Year National Warranty
  • Support by Bambu LabAuthorised Service Center
  • Free shipping over $99 (excludes 3D printers)

Give your Klipper printer a touchscreen and a Raspberry Pi computer in one tidy unit. The BIGTREETECH Raspberry Pad 5 is an expansion board for the Raspberry Pi CM4 compute module with a 5-inch IPS capacitive touch display built in.

What you get

  • A clear touchscreen on the printer. 800 Γ— 480 IPS capacitive display with adjustable brightness and display direction.
  • The ports you'd expect from a Pi. Three USB 2.0 ports, Gigabit Ethernet, a 40-pin GPIO header laid out the same as a Raspberry Pi, a CSI camera port and an HDMI output for an external display.
  • CAN bus built in. The USB-C port can be switched to CAN bus mode for CAN toolhead boards.
  • Keeps the time. On-board real-time clock (needs a CR1220 coin cell).

Compatibility

  • Compute module: Raspberry Pi CM4, either the Lite version (boots from microSD) or the eMMC version.
  • Software: Raspberry Pi OS, or a Fluidd or Mainsail OS image.

Good to know

  • The Pad 5 needs a Raspberry Pi CM4 to work. The CM4 is not part of the Pad 5 itself.
  • Power is 5 V through USB-C only. Do not connect it to a 12 V or 24 V CAN bus USB-C port β€” this will damage the Pad 5 and the CM4.
  • The built-in screen and USB ports need to be enabled in the Pi's configuration after installing the OS. The steps are in the BIGTREETECH Pad 5 manual.
  • Give the CM4 extra cooling under heavy load, and handle the screen with care.

Stocked in Sydney by 3D BRO.