BIGTREETECH
BigTreeTech Pi2 / CB2
Pickup availability at Regents Park Warehouse/Service Center
In-Store, Order now and collect anytime.
-
Regents Park Warehouse/Service Center
In-Store, Order now and collect anytime.6 Rose Crescent
Regents Park NSW 2143
Australia(02) 9772 4315
Shipping & Returns
- One Year National Warranty
- Support by Bambu LabAuthorised Service Center
- Free shipping over $99 (excludes 3D printers)
A small computer made for running Klipper, with more processing power and storage than the first-generation CB1 and Pi. The BIGTREETECH Pi 2 and CB2 are single-board computers built around the Rockchip RK3566, designed for 3D printer users.
What you get
- Quicker Klipper host. Rockchip RK3566 quad-core Cortex-A55 processor at 1.8 GHz.
- Storage on board. Built-in eMMC, so the system does not have to live on a microSD card. The Pi 2 has 2 GB RAM and 32 GB eMMC, and also takes a microSD card or an M.2 SSD.
- Fast network links. Dual-band 2.4/5 GHz WiFi and gigabit Ethernet for remote printing and file transfers.
- Powered from the printer (Pi 2). A terminal block accepts 12β24 V DC, so no separate adapter is needed; USB-C 5 V also works.
Which one?
| Variant | Form | Use it when |
|---|---|---|
| Pi 2 | Standalone board with USB, HDMI, Ethernet and 40-pin GPIO | You want a separate Klipper host next to your mainboard |
| CB2 | Core board with the same connector as the Raspberry Pi CM4 | Your mainboard or carrier board has a CM4-style socket |
Good to know
- The Pi 2 has no SPI interface. For an SPI screen, BIGTREETECH says to connect through an IO2CAN or EBB with a U2C.
- The CB2 is the same size as the CB1 and CM4. The Pi 2 is slightly longer than a Raspberry Pi 4B (93.8 Γ 56 mm) but uses the same mounting-hole spacing.
- Use the system image from BIGTREETECH's CB2 GitHub releases page.
- Only one screen type (DSI or HDMI) can be enabled at a time.
Stocked in Sydney by 3D BRO.
