BIGTREETECH

BIGTREETECH Panda PWR Intelligent Power Management Module

$68.99
Tax included. Shipping calculated at checkout.

Apply

Pickup availability at Regents Park Warehouse/Service Center

In-Store, Order now and collect anytime.

Pickup Availability
  • Regents Park Warehouse/Service Center
    In-Store, Order now and collect anytime.

    6 Rose Crescent
    Regents Park NSW 2143
    Australia

    (02) 9772 4315

Shipping & Returns
  • One Year National Warranty
  • Support by Bambu LabAuthorised Service Center
  • Free shipping over $99 (excludes 3D printers)

Let your printer switch itself off when the job is done. The BIGTREETECH Panda PWR is a WiFi power management module that sits between the wall socket and your printer, so you can turn mains power on and off remotely and keep an eye on energy use.

What you get

  • Auto power-off after printing. Paired with a Panda Touch, once the printer reaches the temperature limit you set, it counts down and then cuts power.
  • Remote on/off from your phone or computer. A built-in web page on your local network β€” no app to install.
  • See what a print costs in power. It records the energy used by the connected printer.
  • Timed shutdown. Start a countdown and it switches off at the end.
  • Two USB outputs. USB1 is switchable (for example a USB light strip that follows the printer's light); USB2 is always on and can power a Panda Touch.

Compatibility

  • Printers: BIGTREETECH lists the Bambu Lab X1C, P1P, P1S and A1, and other printers with an IEC C14 power inlet.
  • Works on its own or with a Panda Touch. Standalone mode gives web control and timers; auto power-off after a print and light-following are set up through the Panda Touch.
  • WiFi: 2.4 GHz only (802.11 b/g/n).

Good to know

  • First setup is done by joining the module's own WiFi hotspot and choosing your home network.
  • Control is over your local network.
  • Keep it dry β€” it is not for damp environments. Operating temperature βˆ’10 Β°C to 60 Β°C.
  • The Type-C port is input only, for firmware updates and factory reset.

Stocked in Sydney by 3D BRO.