BIGTREETECH

BIGTREETECH Mini 12864 RGB v1.0 3D Printer LCD Display Screen

$22.00
Tax included. Shipping calculated at checkout.

Apply

Pickup availability at Regents Park Warehouse/Service Center

In-Store, Order now and collect anytime.

Pickup Availability
  • Regents Park Warehouse/Service Center
    In-Store, Order now and collect anytime.

    6 Rose Crescent
    Regents Park NSW 2143
    Australia

    (02) 9772 4315

Shipping & Returns
  • One Year National Warranty
  • Support by Bambu LabAuthorised Service Center
  • Free shipping over $99 (excludes 3D printers)

A compact printer screen with a backlight you can set to any colour you like. The BIGTREETECH Mini 12864 V1.0 is a 12864-type LCD with an RGB backlight and a rotary knob, for mainboards with standard EXP1 and EXP2 display ports.

What you get

  • Pick your backlight colour. The RGB backlight is controlled from the printer's Lights menu, including colour presets.
  • Familiar controls. Works like a standard 12864 LCD, with a press-and-turn knob.
  • Small footprint. The board measures 104.99 Γ— 47 mm, so it fits compact builds.
  • Works with older boards too. The SD card interface supports 3.3 V and 5 V logic, for better compatibility with 5 V boards such as those using the MEGA2560.

Compatibility

  • Mainboards with EXP1 and EXP2 display ports β€” it connects the same way as a standard LCD 12864.
  • Power input: DC 5 V.

Good to know

  • Your mainboard firmware needs to be set up for this screen. BIGTREETECH's manual gives the Marlin settings: enable the FYSETC Mini 12864 2.1 display option and NeoPixel LED support, plus a contrast setting change.
  • Wire it up with the printer powered off, and check the cables are the right way round before switching on.
  • The manual is on the BIGTREETECH GitHub page.

Stocked in Sydney by 3D BRO.