BIGTREETECH
BIGTREETECH KNOMI v1.0
Pickup availability at Regents Park Warehouse/Service Center
In-Store, Order now and collect anytime.
-
Regents Park Warehouse/Service Center
In-Store, Order now and collect anytime.6 Rose Crescent
Regents Park NSW 2143
Australia(02) 9772 4315
Shipping & Returns
- One Year National Warranty
- Support by Bambu LabAuthorised Service Center
- Free shipping over $99 (excludes 3D printers)
See what your printer is up to with a glance at the toolhead. The BIGTREETECH KNOMI is a mini round screen made for 3D printers running Klipper, showing printer status through an animated display.
What you get
- Status at a glance. The KNOMI interface shows what the printer is doing, so you don't need to walk over to the main screen or open a browser.
- No data cable to run. It talks to your printer over Wi-Fi, so it only needs a power connection.
- Easy to power. Accepts DC 5β24 V through either a USB-C port or an MX1.25 connector.
- Make it your own. The firmware is open source, and BIGTREETECH publishes a tutorial for customising the interface and its GIF animations.
Compatibility
- Firmware: Klipper-based printers.
- Mounting: printable mounting parts are available for the Voron StealthBurner, and the 3D model files are published so you can adapt it to other printers.
- Wi-Fi: networks using WPA PSK encryption only are not supported. Set your router to WPA/WPA2 PSK mixed mode or another compatible mode.
Good to know
- This is the original KNOMI (V1), not the KNOMI 2.
- Firmware, the Klipper config file and manuals are on the BIGTREETECH KNOMI GitHub page. The USB-C port can be used for flashing.
- The printed mounting plate is a snap fit and can break with repeated assembly, so BIGTREETECH suggests printing a spare.
Stocked in Sydney by 3D BRO.
