BIGTREETECH

BIGTREETECH EXP MOT V1.0 Module driver expansion module for SKR 1.3/1.4/ SKR2

$15.00
Tax included. Shipping calculated at checkout.

Apply

Pickup availability at Regents Park Warehouse/Service Center

In-Store, Order now and collect anytime.

Pickup Availability
  • Regents Park Warehouse/Service Center
    In-Store, Order now and collect anytime.

    6 Rose Crescent
    Regents Park NSW 2143
    Australia

    (02) 9772 4315

Shipping & Returns
  • One Year National Warranty
  • Support by Bambu LabAuthorised Service Center
  • Free shipping over $99 (excludes 3D printers)

Run out of driver slots? Add three more without replacing your mainboard. The BIGTREETECH EXP-MOT V1.0 is a driver expansion module that plugs into a mainboard's EXP ports and gives you three extra stepper driver positions.

What you get

  • Three more motors. Handy for extra Z motors or additional extruders.
  • Your choice of driver mode. The added drivers can run in STEP/DIR, UART or SPI mode.
  • Works with 8-bit and 32-bit boards. Logic voltage is selectable between 3.3 V and 5 V.
  • 12 V or 24 V machines. Takes DC 12 V or DC 24 V motor power.

Compatibility

  • Any mainboard with EXP1 and EXP2 ports available.
  • BIGTREETECH lists the SKR V1.3, SKR V1.4, SKR V1.4 Turbo, SKR PRO V1.2, SKR 2 and Octopus as examples.

Good to know

  • Your mainboard firmware must be edited to assign pins for the three new drivers before they will work.
  • STEP/DIR mode connects through EXP2 only and needs the M2EN and M3EN jumpers fitted. UART and SPI modes need both EXP1 and EXP2.
  • Set the logic voltage jumper to match your mainboard β€” generally 3.3 V for 32-bit boards and 5 V for 8-bit boards.
  • The module must have 12 V or 24 V connected to its DCIN input.
  • Board size 84.3 Γ— 46 mm, mounting holes 76.3 Γ— 38 mm. The manual and pin diagrams are on the BIGTREETECH GitHub page.

Stocked in Sydney by 3D BRO.