BIGTREETECH

BIGTREETECH EBB SB 2209/2240 Canbus Board For Voron

$35.00
Tax included. Shipping calculated at checkout.

Apply
EBB SB Model: EBB SB2209(RP2040)

Pickup availability at Regents Park Warehouse/Service Center

In-Store, Order now and collect anytime.

Pickup Availability
  • Regents Park Warehouse/Service Center
    In-Store, Order now and collect anytime.

    6 Rose Crescent
    Regents Park NSW 2143
    Australia

    (02) 9772 4315

Shipping & Returns
  • One Year National Warranty
  • Support by Bambu LabAuthorised Service Center
  • Free shipping over $99 (excludes 3D printers)
EBB SB Model

Tidy up your Voron StealthBurner wiring down to a single cable. The BIGTREETECH EBB SB2209 CAN (RP2040) is a toolhead board set made for the StealthBurner that connects to your printer by CAN bus or USB-C.

What you get

  • Everything plugs in at the toolhead. Extruder motor, heater, thermistor, fans, LEDs, X endstop and probe all connect to the two boards, which are shaped to fit inside the StealthBurner.
  • Extruder driver built in. On-board TMC2209 running in UART mode.
  • Input shaping ready. ADXL345 accelerometer on board.
  • Works with your choice of probe. Connections for Voron Tap, BLTouch, MicroProbe and NPN or PNP proximity switches.
  • Flexible fan voltage. Fan outputs can be set to 5 V, 12 V or 24 V by jumper, with a 4-pin PWM fan header as well.

Compatibility

  • Toolhead: Voron StealthBurner.
  • Firmware: Klipper. Katapult can be installed if you want to update firmware over CAN.
  • Temperature sensors: thermistor, or 2-wire and 4-wire PT100/PT1000. 3-wire PT100/PT1000 is not supported.

Good to know

  • This is the RP2040 version. It uses larger connectors and a different Klipper configuration from the earlier SB2209 β€” use the RP2040 sample config and build guide on the BIGTREETECH EBB GitHub page.
  • In the box: EBB SB2209 CAN (RP2040) board, EBB SB0000 CAN board, CAN bus cable, heat sink, connector housings and crimp terminals, jumpers, wire ferrules and M3Γ—10 screws.
  • StealthBurner parts, fans, LEDs and printed parts are not included. BIGTREETECH's modified printed part files are available on its GitHub page.
  • If the board is the last device on the CAN bus, fit the 120R termination jumper.

Stocked in Sydney by 3D BRO.