BIGTREETECH
BIGTREETECH BTT RRF Wifi V1.0 Module Expansion board 3D Printer Parts RepRap Duet Firmware For SKR V1.3 SKR V1.4 Turbo
Pickup availability at Regents Park Warehouse/Service Center
In-Store, Order now and collect anytime.
-
Regents Park Warehouse/Service Center
In-Store, Order now and collect anytime.6 Rose Crescent
Regents Park NSW 2143
Australia(02) 9772 4315
Shipping & Returns
- One Year National Warranty
- Support by Bambu LabAuthorised Service Center
- Free shipping over $99 (excludes 3D printers)
Control your SKR-based printer from a web browser over Wi-Fi. The BIGTREETECH RRF WiFi V1.0 is a Wi-Fi module for SKR mainboards running RepRapFirmware, giving you access to the Duet Web Control interface.
What you get
- Printer control from your browser. Once connected to your network, the board serves Duet Web Control at its IP address.
- Plugs straight in. Connects to the mainboard's EXP1 and EXP2 ports.
- Clear status light. The blue LED flashes while connecting and stays on once the Wi-Fi link is up.
Compatibility
- Mainboards: BIGTREETECH's manual lists RepRapFirmware support for the SKR V1.1, V1.3 and V1.4. This listing covers the SKR V1.3 and SKR V1.4 Turbo.
- Firmware: RepRapFirmware. The mainboard must be flashed with the Wi-Fi build of RepRapFirmware first.
Good to know
- This is a project for confident tinkerers. You need to flash RepRapFirmware, prepare an SD card with the RepRapFirmware folder structure and Duet Web Control files, and create config files for your printer.
- Wi-Fi details are entered over USB serial using G-code commands (M552 and M587).
- The Wi-Fi module's own firmware can only be updated over its USB port, not with M997 S1.
- Connecting by name needs a device that supports mDNS. Otherwise use the IP address.
- The manual is on the BIGTREETECH GitHub page.
Stocked in Sydney by 3D BRO.
