FusRock FusForce™ PAHT-CF
From $66.99
* Get free shipping for orders over $150.00
FusRock FusForce™ PAHT-CF Filament 15% Carbon Fiber Reinforced High-Temperature Polyamide Industrial FDM Materials, high heat resistance.
Discount per Quantity
| Quantity | Discount | Price |
|---|---|---|
| 10 + | 10% | $60.29 – $324.00 |
FusRock FusForce™ PAHT-CF Filament 1.75mm 0.5/1kg/2.5kg
Formoly FusRock UltraPA CF
High temperature Polyamide based with 15% chopped carbon fiber reinforced FDM material.
User Manual: https://github.com/3dbro-au/FusRock-Filaments/blob/main/FusForce%E2%84%A2%20UltraPA-CF_TDS(EN).pdf
Product Description
FusForce™ UltraPA CF Filament is specially developed for FDM 3D printing process, and its substrate material is high temperature nylon, which has low density, low moisture absorption, high strength, high abrasion resistance, excellent chemical resistance and high heat resistance
It also has good dimensional stabelity,no warpage and no shrinkage during the printing process, and can be used with FusFree™ S-Purple Quick-Remove Support material to solve the problem of poor molding effect on the support surface of complex models
Material Properties
| Property | Testing method | Typical value |
| Density | ISO 1183 | 1.15 g/cm³ |
| Water absorption | ISO 62: Method 1 | 0.60% |
| Melting Temperature | ISO 11357 | 231℃ |
| Melting index | 280℃, 2.16kg | 10.78 |
| Determination of temperature | ISO 75: Method A | 113℃ (1.8MPa) |
| ISO 75: Method B | 188℃ (0.45MPa) | |
| Tensile strength(X-Y) | ISO 527 | 121.77±4.28 Mpa |
| Toung’s modulus(X-Y) | ISO 527 | 7807.99±517.99 Mpa |
| Elongation at break(X-Y) | ISO 527 | 1.88±0.11% |
| Bending strength (X-Y) | ISO 178 | 190.85±2.07 Mpa |
| Bending modulus (X-Y) | ISO 178 | 8512.22±241.31 Mpa |
| Charpy impact strength (X-Y) | ISO 179 | 7.74±1.13 KJ/m³ |
| Single Shell Z-axis tensile strength | Custom method: Vase mode | 41.90±3.87 Mpa |
| Nozzle size 0.6mm/Layer height 0.3mm | ||
| Layer time 20s |
Recommanded Printing conditions
| Nozzle Temperature | 300-320℃ |
| Recommanded Nozzle Diameter | 0.4-1.0mm |
| Recommanded build surface treatment | PEI film or Coating with PVP glue |
| Build plate temperature | 70-80℃ |
| Raft separation distance | 0.12-0.16mm |
| Cooling fan speed | off |
| Print speed | 30-60mm/s |
| Retraction distance | 3-6mm |
| Retraction speed | 1800-3600mm/min |
Recommended Nozzle:
- Hardened Steel Nozzle 1100-HS
- DLC Hardened Steel Nozzle 1100-HSD
- Ruby Nozzle A019
- Tungsten Carbide Nozzle
Recommended Hotend:
- Dragon series
- Dragonfly series
Product Advantages
Smart Fiber Reinforced Technology
FusRock controlling the dispersion and distribution of chopped carbon fibers within the material matrix during the extrusion process, the fibers form a mesh skeleton structure within the material and bear most of the load transferred by the material matrix. Smart Fiber Reinforced Technology greatly improves the mechanical properties and heat resistance of the material, and releases the internal stress during the printing process through the fiber mesh structure, resulting in good dimensional stability of the printed part and no warpage.
Low Mositure Sensitivity
FusForce™ UltraPA-CF based on modified PA12 long-chain nylon, whose saturated moisture absorption rate is only one tenth of ordinary PA6, completely solving the defects of the mechanical properties and dimensional stability of nylon materials that change greatly after absorbed moisture.
Super Abrasive Resistance
FusForce™ UltraPA-CF has a low coefficient of friction, self-lubricating properties and excellent wear resistance, which can easily meet all kinds of high-strength gears or industrial applications with high wear requirements.
Specimens printed under the following conditions: Nozzle temp 320°C, Bed temp 80°C, Print speed 45mm/s, ln’ill 100%, Infill angle±45°, Post-processing: 100°C Annealing 8 hours
Additional Suggestions:
1. Nylon material is very easy to absorb moisture within the environment, and printing after absorbing moisture will result ozzing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the FusForce UltraPA-CF vacuum foil bag for printing Please put the unused filament back into the original aluminum foil bag for sealed storage
2. After the material is damp, there will be more printing ozzing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 80-100°C for 4-6h to restore the printing quality of FusForce UltraPA-CF
3. It is recommended to use hardened steel and above grade nozzles made by Phaetus, which can effectively improve the print quality. Besides, it is recommended that the thickness of the heating block is longer 12mm
4. After the printing is completed, the printed part can be annealed to further improve the strength of print part. Annealing conditions: leave printing part in an oven at 80-100°C for 4 to 8 hours and cool to room temperature naturally
| Weight | 0.01 kg |
|---|---|
| Dimensions | 1 × 1 × 1 cm |
Related products
Filaments
Filaments
Filaments
Filaments
Filaments
