FusRock PLA Aero Filament

FusFun™ PLA-Aero is a type of lightweight 3D printing material specially developed for aircraft

model, ship model, drone and other fields. PLA-Aero controls the foaming ratio of the material

by adjusting the temperature during the printing process so that the density of the material

extruded by the nozzle can be adjusted within a certain range. With this technique, it is easy to

reduce the weight of the model. In the best-case scenario, the model weight can be reduced to

50% of a model printed with ordinary PLA. In addition to that, the matte texture of the printed

surface can reduce the visibility of printed layers and thus give a smooth surface finish.

Filament Physical Properties

Specimens printed under the following conditions: Nozzle size 0.4mm，Nozzle temp 250°C, Bed temp 75°C, Print speed 40mm/s, Infill 100%, Infill angle ±45°

Recommended printing conditions

Printing Tips：

1. Since PLA-Aero adopts the “On-Demand foaming” technology, the filament will continue to expand in the nozzle after being heated during the printing process. Therefore, it will cause unavoidable stringing during the nozzle movement. Even adjusting the retraction setting in the slicing software cannot solve this problem. Based on the above, it is recommended to turn off the retraction setting. The string on the surface of models can easily be removed by hand.