BIGTREETECH Octopus PRO
BIGTREETECH Octopus PRO V1.0 Intergrated MAX31865 High Voltage up to 60V
From $105.00 Select options

BIGTREETECH Octopus PRO V1.0 Intergrated MAX31865 High Voltage up to 60V

From $105.00

* Get free shipping for orders over $150.00

BIGTREETECH Octopus PRO V1.0 Intergrated MAX31865 High Voltage up to 60V

Frequently Bought Together
TMC5160 PRO
$39.50

Local Pickup available at 3D BRO

Usually ready within 15 mins

View store information

BIGTREETECH Octopus PRO V1.0 Intergrated MAX31865 High Voltage up to 60V

 

BIGTREETECH Octopus Pro V1.0 Control Board/ Mainboard

Firmware link: Click here

  • 【Main Control Chip】The main control board uses 32-bit ARM-level Cortex-M4 series STM32F407ZET6/ STM32F429ZE / STM32F446ZE chip with a frequency of up to 168MHz and the flash is 1MB.
  • 【Support 60V Input】Supports up to 8 3D printer motherboards with a maximum 60V stepper motor. The motor drive power supply supports up to 60V input (only for the motor drive power supply).
  • 【6 Controllable Fans】Up to 6 controllable fans, two normally open fans, and both support power supply voltage, 12V, 5V options.
  • 【Update Firmware: Klipper/Marlin/RRF】Supports firmware update via DFU mode. This is where the firmware is sent to the board directly from the PC and does not require a bootloader however this method is not recommended for novice users as discussed later in this document.
  • 【Level conversion IC】Supports proximity sensor, jumper optional pull-up resistor, supports more models, supports BL Touch.

 

PRO aee1cd6b 5c9f 44c2 ba64 a9c2101a3304

Additional information

Weight0.3 kg
Dimensions1 × 1 × 1 cm
Chip

STM32F446, STM32F429, STM32H723

Reviews

There are no reviews yet.

Be the first to review “BIGTREETECH Octopus PRO V1.0 Intergrated MAX31865 High Voltage up to 60V”