FusRock FusFun ASA Aero 1KG

$59.95

* Get free shipping for orders over $150.00

FusRock FusFun ASA Aero

RangeDiscounted Price
10 + $53.96
Buy 10 or more filaments, get 10% off (mix color & brand)

Local Pickup available at 3D BRO

Usually ready within 15 mins

View store information

FusRock FusFun ASA Aero

 

FusFun ASA-Aero is a type of light weight 3D printing material specially developed for aircraft model, ship model, drone and other fields. It can be controlled the foaming ratio by adjusting the temperature during the printing process, so that the density of the material extruded by the nozzle can be adjusted within a certain range. With this technique, it is easy to reduce the weight of the prints. In the best-case scenario, the prints weight can be reduced to 50% of a prints in ordinary ASA. In addition to that, the matte texture of the prints’ surface can reduce the visibility of printed layers and thus gives a smooth surface finish.

 

Material Properties

PropertyTesting methodTypical value
DensityISO 11831.02/cm³
Melt indexISO 1133 250℃,2.16kgISO 1133 250℃,2.16kg
Determination of temperatureISO 75: Method A71℃ (1.8MPa)
Determination of temperatureISO 75: Method B80℃ (0.45MPa)
Tensile strength at Break (X-Y)ISO 52711.60±0.07MPa
Elongation at break (X-Y)ISO 52710.39±1.15%
Young’s Modulus (X-Y)ISO 527883.01±29.97MPa
Tensile strength at Break (Z)ISO 5275.22±0.9MPa
Elongation at break (Z)ISO 5276.45±0.48%
Young’s Modulus (X-Y)ISO 527394.06±24.07MPa
Bending strength (X-Y)ISO 17831.43±0.46MPa
Bending Modulus (X-Y)ISO 178945.45±106.26MPa
Charpy impact strength (X-Y)ISO 1792.63±0.29MPa

Specimens printed under the following conditions: Nozzle size 0.4mm,Nozzle temp 250℃, Bed temp 100℃, Print speed 45mm/s, Infill 100%, Infill angle ±45°

Recommended printing conditions

Nozzle Temperature240-280°C
Recommended Nozzle Diameter≥0.6 mm
Recommended build surface treatmentPEI Film or Coating with PVP glue
Build plate temperature100-110°C
Raft separation distance0.14-0.18mm
Cooling fan speed0%-50%
Print speed30-90 mm/s
Retraction distanceClosed
Retraction speedClosed
11 5

Printing Tips:

Due to “On-Demand foaming” technology, ASA-Aero will continue to expand in the nozzle after being heated during the printing process. There will be unavoidable stringing during the nozzle movement. This phenomenon will not be avoided even after adjusting the retraction setting in the slicing software. Therefore, it is recommended to turn off the retraction setting. The string on the surface of models can easily be removed by hand.

Since ASA material requires high ambient temperature during printing, it is recommended to use nozzle with orifice 0.6mm or bigger to print single-layer thin-walled models to ensure strength and reduce shrinkage.

Additional information

Weight1.4 kg
Dimensions24 × 24 × 8 cm
Color

Nature

Reviews

There are no reviews yet.

Be the first to review “FusRock FusFun ASA Aero 1KG”