This Kits is not in-stock item, we start printing it once your order is confirmed. Normally it will take 1-3 days(including weekend, but not public holidays) to complete printing.

Please contact us if you have special configurations.

 

This printed kit are printed in eSUN ABS filaments. Parts will printed in sets with BambuLab X1C or Voron2.4.

Voron 2.4 Printed Part

voron 2.4 printed parts settings

Slice Settings:

Layer Height: 0.2mm

Extrusion Width: 0.4mm, infill: 0.45mm

Infill Type: Grid

Infill Percentage: 40%

Wall count: 4

Sold Top/Bottom Layers: 5

voron 2.4 r2 printed parts

Tip:

[a] means in Accent Color, otherwise will be Main color

x2 means 3 copies.

Color Tip:

Click Here for color preview(3rd party website, not refer to actual printing color): VORON COLOR CONFIGURATOR

 

What’s inside the Kit:

 

Electronics_Bay:

• lrs_200_psu_bracket_x2.stl
• raspberrypi_bracket.stl
• rs25_psu_bracket_clip.stl
• Octopus_bracket_set.stl
• pcb_din_clip_x3.stl
• plug_panel_generic_combo.stl

 

Gantry/AB_Drive_Units:

• a_drive_frame_lower.stl
• a_drive_frame_upper.stl
• b_drive_frame_lower.stl
• b_drive_frame_upper.stl
• [a]_z_chain_retainer_bracket_x2.stl
• [a]_cable_cover.stl

 

Gantry/Front_Idlers:

• front_idler_left_lower.stl
• front_idler_left_upper.stl
• front_idler_right_lower.stl
• front_idler_right_upper.stl
• [a]_tensioner_left.stl
• [a]_tensioner_right.stl

 

Gantry/X_Axis/X_Carriage:

• blower_housing_rear.stl
• hotend_fan_mount.stl
• probe_retainer_bracket.stl
• x_carriage_frame_left_MGN12.stl
• x_carriage_frame_right_MGN12.stl
• [a]_blower_housing_front.stl

 

Gantry/X_Axis/X_Carriage/Direct_Feed:

• [a]_connector_cover.stl
• [a]_guidler.stl
• [a]_latch.stl
• [a]_latch_shuttle.stl
• chain_anchor_3hole.stl
• extruder_body.stl
• extruder_motor_plate.stl

 

Gantry/X_Axis/X_Carriage/Printheads/Dragon:

• printhead_front_Dragon.stl
• printhead_rear_Dragon.stl

 

Gantry/X_Axis/XY_Joints:

• [a]_endstop_pod_D2F_switch.stl
• [a]_xy_joint_cable_bridge_3hole.stl
• xy_joint_left_lower_MGN12.stl
• xy_joint_left_upper_MGN12.stl
• xy_joint_right_lower_MGN12.stl
• xy_joint_right_upper_MGN12.stl

 

Gantry/Z_Joints:

• z_joint_lower_x4.stl
• z_joint_upper_x4.stl

 

Gantry:

• [a]_z_belt_clip_lower_x4.stl
• [a]_z_belt_clip_upper_x4.stl
• z_chain_bottom_anchor.stl
• z_chain_guide.stl

 

Spool_Management:

• bowden_retainer.stl
• spool_holder.stl

 

Tools:

• MGN12_rail_guide_x2.stl
• MGN9_rail_guide_x2.stl
• pulley_jig.stl

 

Z_Drive:

• [a]_belt_tensioner_a_x2.stl
• [a]_belt_tensioner_b_x2.stl
• [a]_z_drive_baseplate_a_x2.stl
• [a]_z_drive_baseplate_b_x2.stl
• z_drive_main_a_x2.stl
• z_drive_main_b_x2.stl
• z_drive_retainer_a_x2.stl
• z_drive_retainer_b_x2.stl
• z_motor_mount_a_x2.stl
• z_motor_mount_b_x2.stl

 

Z_Endstop:

• nozzle_probe.stl

 

Z_Idlers:

• [a]_z_tensioner_x4_9mm.stl
• z_tensioner_bracket_a_x2.stl
• z_tensioner_bracket_b_x2.stl