Phaetus Tungsten Carbide Nozzle
From $84.95 Select options

Phaetus Tungsten Carbide Nozzle

From $84.95

* Get free shipping for orders over $150.00

Phaetus Tungsten Carbide Nozzle, Best Idea for Nylon Carbon Fiber Fialments, Fast Shipping from Sydney, Local Pick-up Available

Frequently Bought Together
$12.00

Local Pickup available at 3D BRO

Usually ready within 15 mins

View store information

We are Pheatus Official Authorized Reseller. And we only sell Genuine Pheatus Products.

Features:

  • Hardness (Mohs): 9
  • Maximum Printing Temperature: 550℃
  • Thermal Conductivity: 130W/m·k
  • Expansion Coefficient: 4.5μm/m·℃
  • Min. Orifice Diameter: φ0.2
  • Tolerance: ±0.01mm
  • Inner Hole Roughness: ≤Ra0.4μm
  • Concentricity: 0.02mm

 

Performance Analysis

  • From conventional printing with PLA to PEEK, even to Carbon Fiber reinforced materials, Tungsten Carbide Nozzle can easily handle with long time printing with any material.
  • Super Wear-Resistance | Using the world’s leading ultra-high hardness tungsten carbide (hardness > 2700Hv (up to 2900Hv)), super wear resistance ensures long-term printing without wearness of nozzle hole and tip flat.
  • High Temperature Performance | Composed of tungsten carbide and copper alloy with super hardness and excellent conductivity, maximum printing temperature can be 550℃.
  • Low Pushing Force | Tungsten Carbide Nozzle with high purity more than 99.98% and high thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion.
  • Faster Speed | Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. Unique passageway in the nozzle improves the flow rate at the inner hole faster.
  • Low Friction | The whole nozzle is applied with WS2 nano-coating after adding a hard and smooth nickel plating layer. Surface friction coefficient is as low as 0.03 which makes the nozzle with clean printing, without plastic sticking to it.

Applicable Filament

  • One Nozzle , All Materials
    From conventional printing with PLA to PEEK, even to Carbon Fiber reinforced materials, Tungsten Carbide Nozzle can easily handle with long time printing with any material.

 

WS2 Nano-coating

Friction coefficient is only 0.03, effectively avoiding molten plastic sticking to the nozzle;

Coating thickness 0.5μm, without effects on any dimension accuracy;

Maintaining good lubrication and wear-resistance from low temperature – 270℃ to maximum temperature 650℃;

Strong adsorption capacity, the inner and outer surfaces of the nozzle can be 100% covered with lubrication,extreme low pushing force ensures the flow of filament;

Stable chemical properties, non-toxic, non-corrosive and insoluble in other solvents.

tungsten carbide 3d printer nozzle

phaetus tungsten carbide nozzle

Additional information

Weight0.1 kg
Dimensions5 × 5 × 4 cm
Nozzle Type

V6, Volcano

Nozzle Size

0.4mm, 0.6mm, 0.8mm

Reviews

There are no reviews yet.

Be the first to review “Phaetus Tungsten Carbide Nozzle”