{"title":"3D Printer","description":"\u003cp\u003eCompare Bambu Lab 3D printers available from 3D BRO Australia, with local Sydney stock, pickup options and authorised after-sales support.\u003c\/p\u003e\n\u003cp\u003eFor large prototypes and advanced multi-material production, see the \u003ca href=\"\/products\/bambu-lab-h2c-combo\"\u003e\u003cstrong\u003eBambu Lab H2C Combo in Australia\u003c\/strong\u003e\u003c\/a\u003e. You can also use our \u003ca href=\"\/pages\/bambu-lab-h2c-vs-x2d-australia\"\u003eH2C vs X2D buying guide\u003c\/a\u003e to compare large-format and compact dual-nozzle workflows.\u003c\/p\u003e\n\u003cp\u003eOn a budget? Check \u003ca href=\"\/collections\/refurbished-3d-printers\"\u003e\u003cstrong\u003eofficial refurbished Bambu Lab printers\u003c\/strong\u003e\u003c\/a\u003e from $699 with full warranty, and stock up on \u003ca href=\"\/collections\/filaments\"\u003e3D printer filament\u003c\/a\u003e shipped from the same Sydney warehouse.\u003c\/p\u003e\n\u003cp\u003eWant current pricing at a glance? See the \u003ca href=\"\/pages\/bambu-lab-price-list-australia\"\u003eBambu Lab price list for Australia\u003c\/a\u003e, updated monthly — and read \u003ca href=\"\/pages\/why-buy-bambu-lab-from-3d-bro\"\u003ewhy buyers choose 3D BRO over ordering direct\u003c\/a\u003e: same price, same-day Sydney pickup, and warranty service handled by our authorised service centre from day one.\u003c\/p\u003e","products":[{"product_id":"bambu-lab-a1","title":"Bambu Lab A1","description":"\u003cp\u003e\u003cstrong\u003eThe Bambu Lab A1 is a full-size open-frame 3D printer with a 256 × 256 × 256 mm build volume, full automatic bed levelling and a 3.5-inch colour touchscreen.\u003c\/strong\u003e It is the machine to buy if you print PLA and PETG and want Bambu Lab's automation and print quality without paying for an enclosure you would not use.\u003c\/p\u003e\n\u003cp\u003eBought from 3D BRO — a Bambu Lab authorised reseller and Australia's authorised service centre — with local warranty assistance and technical support from our Sydney team.\u003c\/p\u003e\n\u003ch2\u003eOpen frame: what that actually means for you\u003c\/h2\u003e\n\u003cp\u003eThe A1 has no enclosure, and that is a real limit rather than a detail. Bambu Lab lists PLA, PETG, TPU and PVA as its suitable materials, and lists ABS, ASA, PC, PA, PET and fibre-reinforced filaments as \u003cstrong\u003enot recommended\u003c\/strong\u003e — those need trapped heat to avoid warping and layer separation, and an open printer cannot provide it.\u003c\/p\u003e\n\u003cp\u003eFor most people that is not a problem: PLA and PETG cover models, prototypes, jigs, replacement parts and almost all classroom work. But if ABS, ASA or carbon-fibre filaments are on your list, buy an enclosed machine such as the \u003ca href=\"\/products\/bambu-lab-p1s\"\u003eP1S\u003c\/a\u003e instead. We would rather tell you now than replace a printer later.\u003c\/p\u003e\n\u003ch2\u003eWhat the A1 gets right\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull automatic bed levelling\u003c\/strong\u003e with load-cell sensing, so the first layer is handled for you rather than being a skill you have to acquire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-swap nozzle\u003c\/strong\u003e — changing from 0.4 mm to 0.2 mm for fine detail or 0.8 mm for speed takes seconds, without tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive flow rate compensation and vibration compensation\u003c\/strong\u003e, which is how it holds surface quality at 500 mm\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-colour printing\u003c\/strong\u003e with the \u003ca href=\"\/products\/bambu-lab-ams-lite\"\u003eAMS Lite\u003c\/a\u003e — see the \u003ca href=\"\/products\/bambu-lab-a1-comb\"\u003eA1 Combo\u003c\/a\u003e for the bundle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet enough for a room you sit in\u003c\/strong\u003e, which an enclosed CoreXY generally is not.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eA1 or A1 Mini?\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/bambu-lab-a1-mini\"\u003eA1 Mini\u003c\/a\u003e is the same idea in a 180 mm cube with an 80°C bed, and it costs less. Choose the full-size A1 if you want the 256 mm build volume — the difference between printing a helmet section in one piece and slicing it into four — or if you want the 100°C bed for better PETG adhesion.\u003c\/p\u003e\n\u003ch2\u003eBambu Lab A1 key specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C (all-metal hotend)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOpen frame — no enclosure and no chamber heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.6 and 0.8 mm optional; stainless steel, quick swap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNot recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABS, ASA, PC, PA, PET, and carbon- or glass-fibre reinforced filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild plates\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTextured PEI, Smooth PEI, High Temperature and Cool plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e385 × 410 × 430 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5-inch 320 × 240 IPS touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (IEEE 802.11 b\/g\/n) and Bambu-Bus; micro SD card storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLow rate camera, up to 1080p, timelapse supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMulti-colour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAMS Lite, four filaments. The standard AMS and AMS 2 Pro are not compatible with the A1 series. No AMS is included with this listing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan the Bambu Lab A1 print ABS?\u003c\/h3\u003e\n\u003cp\u003eBambu Lab lists ABS as not recommended for the A1. It is an open-frame printer, so parts cool unevenly and ABS warps and splits. For ABS and ASA you want an enclosed machine such as the \u003ca href=\"\/products\/bambu-lab-p1s\"\u003eP1S\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhich AMS works with the A1?\u003c\/h3\u003e\n\u003cp\u003eOnly the \u003ca href=\"\/products\/bambu-lab-ams-lite\"\u003eAMS Lite\u003c\/a\u003e, which holds four spools. The standard AMS and AMS 2 Pro are built for the enclosed P and H series and do not fit the A1. The \u003ca href=\"\/products\/bambu-lab-a1-comb\"\u003eA1 Combo\u003c\/a\u003e includes an AMS Lite.\u003c\/p\u003e\n\u003ch3\u003eIs the A1 good for schools?\u003c\/h3\u003e\n\u003cp\u003eYes, and it is a common classroom choice: PLA-only printing, automatic bed levelling, a touchscreen, and no enclosure to open or supervise. Ventilate as you would for any 3D printing, and note that abrasive or high-temperature materials are outside its range.\u003c\/p\u003e\n\u003ch3\u003eA1 or P1S?\u003c\/h3\u003e\n\u003cp\u003eMaterials decide it. PLA and PETG only — the A1 is better value and quieter. ABS, ASA or fibre-reinforced — you need the enclosed \u003ca href=\"\/products\/bambu-lab-p1s\"\u003eP1S\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDo you support the A1 in Australia?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller and an authorised service and repair centre, with technical support and warranty assistance handled locally from Regents Park, Sydney. We also stock \u003ca href=\"\/products\/bambu-hotend-a1-series\"\u003eA1 series hotends\u003c\/a\u003e and spare parts.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications taken from Bambu Lab's official A1 spec sheet. Figures are subject to change by the manufacturer; check the current price and availability in the buy panel on this page.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995289588010,"sku":"PF002-A-AU2","price":429.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998419591466-cbf1b132326cab239a6f12b89009c2a12fbbf2ae.png?v=1785935528"},{"product_id":"bambu-lab-a1-comb","title":"Bambu Lab A1 Combo","description":"\u003csection\u003e\n\u003ch2\u003eWhy Choose the Bambu Lab A1 Combo?\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab A1 Combo is a flagship consumer 3D printer that ships with the AMS Lite (Automatic Material System Lite) multi-colour and multi-material module already included in the box. Unlike competitors that charge extra for colour printing capability, 3DBRO bundles the AMS Lite as standard — so you can start printing in up to four colours or material types right out of the box. This printer is ideal for beginners and experienced makers in Australia who want professional-quality results without a steep learning curve. Backed by 3DBRO's status as Australia's first authorised Bambu Lab service centre, every A1 Combo purchase is covered by official warranty and local support you can trust.\u003c\/p\u003e\n\u003ch2\u003eFeatures That Set the A1 Combo Apart\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAMS Lite Included:\u003c\/strong\u003e The A1 Combo ships with the AMS Lite module, enabling automatic multi-colour and multi-material printing with up to four spools. Swap materials mid-print, create gradient prints, or combine PLA with PVA support material effortlessly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Quiet Printing:\u003c\/strong\u003e Operating at under 42dB, the A1 Combo is one of the quietest desktop 3D printers available. It is quiet enough to run in a living room, home office, or classroom without disrupting conversation or concentration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Speed Performance:\u003c\/strong\u003e With a maximum print speed of 500mm\/s and accelerated bed movement, the A1 Combo delivers print times dramatically shorter than traditional FDM printers. Complex models that once took eight hours can now be completed in under two.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Setup:\u003c\/strong\u003e The A1 Combo arrives pre-assembled and calibrated from the factory. Connect via Wi-Fi, load filament, and start your first print within minutes of unboxing. No manual levelling or firmware flashing required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Colour and Multi-Material Printing:\u003c\/strong\u003e Create stunning artistic prints, functional prototypes with soluble supports, or household items in custom colour combinations. The AMS Lite handles material switching automatically, so you do not need to monitor the printer between colour changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Built-in Wi-Fi and the Bambu Studio slicer software (compatible with macOS, Windows, and Linux) allow you to send prints remotely and monitor progress via the Bambu Handy mobile app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera and Monitoring:\u003c\/strong\u003e A built-in time-lapse camera captures every print. Monitor your job live from your phone or desktop, receiving alerts for errors or completion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild Volume:\u003c\/strong\u003e 256 × 256 × 256 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Print Speed:\u003c\/strong\u003e 500 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Level:\u003c\/strong\u003e Less than 42 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint Technology:\u003c\/strong\u003e FDM (Fused Deposition Modelling)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Temperature:\u003c\/strong\u003e Up to 300°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot Bed Temperature:\u003c\/strong\u003e Up to 100°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Filaments:\u003c\/strong\u003e PLA, PETG, TPU, ABS, PC, PA, carbon fibre reinforced filaments, and more\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAMS Lite Slots:\u003c\/strong\u003e 4-spool capacity for multi-colour and multi-material printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wi-Fi, USB-C, microSD card\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 2.4-inch colour touchscreen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Resolution:\u003c\/strong\u003e 0.08mm – 0.28mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpool Holder:\u003c\/strong\u003e Built-in, compatible with standard 1kg spools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 8.3 kg (printer body)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 389 × 389 × 457 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho's It For?\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab A1 Combo is designed for a wide range of users across Australia. Hobbyists and makers will appreciate how the AMS Lite enables creative colour projects without additional purchases. Families and educators will value the quiet operation and easy setup for home learning environments and classroom maker spaces. Prototype designers and small business owners benefit from the high-speed output and multi-material capability for functional testing. Even experienced print farm operators find the A1 Combo's reliability and consistency impressive for its price point. Whether you are printing custom gifts, replacement parts, cosplay props, architectural models, or scientific prototypes, the A1 Combo handles it with speed and precision.\u003c\/p\u003e\n\u003ch2\u003eWarranty and Shipping Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e The Bambu Lab A1 Combo is backed by the official Bambu Lab warranty. 3DBRO is Australia's first authorised Bambu Lab service centre, meaning warranty claims and repairs are handled locally in Sydney — not sent overseas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDispatch:\u003c\/strong\u003e All orders are shipped from Regent Park, Sydney, Australia. We dispatch Monday to Saturday. Standard delivery takes 1–3 business days within Australia, depending on your location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Policy:\u003c\/strong\u003e Please note that 3D printers do not qualify for the free shipping threshold applied to other products on 3DBRO. Printer delivery is $15 per printer within the Sydney area and $30 per printer to the rest of Australia.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocal Stock:\u003c\/strong\u003e Units are in stock and ready to ship. You will receive a dispatch confirmation with tracking details as soon as your order is processed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport:\u003c\/strong\u003e Have questions before or after your purchase? 3DBRO's Sydney-based support team is available to help with setup, filament selection, and any technical issues covered under warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995289751850,"sku":"PF002-A+SA005-AU2","price":649.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998419722538-da2ac2d4cbe95c8e5a48559f8f0ef7ddca7edcfc.webp?v=1769703069"},{"product_id":"bambu-lab-a1-mini","title":"Bambu Lab A1 Mini","description":"\u003cp\u003e\u003cstrong\u003eThe Bambu Lab A1 Mini is a compact open-frame 3D printer with a 180 × 180 × 180 mm build volume, full automatic bed levelling and a touchscreen.\u003c\/strong\u003e It is the cheapest way into the Bambu Lab ecosystem and, for PLA and PETG printing on a desk, one of the easiest printers to live with.\u003c\/p\u003e\n\u003cp\u003eBought from 3D BRO — a Bambu Lab authorised reseller and Australia's authorised service centre — with local warranty assistance and technical support from our Sydney team.\u003c\/p\u003e\n\u003ch2\u003eRead this before you buy\u003c\/h2\u003e\n\u003cp\u003eTwo limits decide whether the A1 Mini is right for you, and both are easier to check now than to discover later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild volume is 180 mm cubed.\u003c\/strong\u003e That is genuinely small — fine for miniatures, brackets, organisers, replacement knobs and most classroom projects, tight for helmets, large cosplay pieces or full-size functional parts. If you are unsure, measure the largest thing you actually intend to print.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt is open frame with an 80°C bed.\u003c\/strong\u003e Bambu Lab lists PLA, PETG, TPU and PVA as suitable, and ABS, ASA, PC, PA, PET and fibre-reinforced filaments as \u003cstrong\u003enot recommended\u003c\/strong\u003e. Those materials need trapped heat that an open printer cannot provide. If they matter to you, look at the enclosed \u003ca href=\"\/products\/bambu-lab-p1s\"\u003eP1S\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch2\u003eWhat it does well\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull automatic bed levelling\u003c\/strong\u003e with load-cell sensing — first layers are handled for you, which is the single biggest source of frustration on cheaper printers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-swap nozzle\u003c\/strong\u003e, tool-free, so 0.2 mm for detail and 0.8 mm for speed are a few seconds apart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 mm\/s toolhead speed\u003c\/strong\u003e with active vibration and flow compensation, so speed does not cost surface quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-colour printing\u003c\/strong\u003e with the \u003ca href=\"\/products\/bambu-lab-ams-lite\"\u003eAMS Lite\u003c\/a\u003e — the \u003ca href=\"\/products\/bambu-lab-a1-mini-combo\"\u003eA1 Mini Combo\u003c\/a\u003e includes one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall and quiet enough for a desk\u003c\/strong\u003e at 347 × 315 × 365 mm and 5.5 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eA1 Mini or A1?\u003c\/h2\u003e\n\u003cp\u003eThe full-size \u003ca href=\"\/products\/bambu-lab-a1\"\u003eA1\u003c\/a\u003e is the same machine scaled up: 256 mm cubed instead of 180, and a 100°C bed instead of 80°C, which helps PETG adhesion. If the extra build volume is worth the difference to you, take the A1 — build volume is the one thing you cannot add later.\u003c\/p\u003e\n\u003ch2\u003eBambu Lab A1 Mini key specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e180 × 180 × 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C (all-metal hotend)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOpen frame — no enclosure and no chamber heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.6 and 0.8 mm optional; stainless steel, quick swap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNot recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABS, ASA, PC, PA, PET, and carbon- or glass-fibre reinforced filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild plates\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTextured PEI, Smooth PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e347 × 315 × 365 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4-inch 320 × 240 IPS touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (IEEE 802.11 b\/g\/n, 2.4 GHz) and Bambu-Bus; micro SD card storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLow rate camera, up to 1080p, timelapse supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMulti-colour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAMS Lite, four filaments. The standard AMS and AMS 2 Pro are not compatible with the A1 series. No AMS is included with this listing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the A1 Mini good for beginners?\u003c\/h3\u003e\n\u003cp\u003eIt is one of the easiest printers to start on: automatic bed levelling, a touchscreen, pre-tuned filament profiles and very little assembly. The limits are size and materials, not difficulty.\u003c\/p\u003e\n\u003ch3\u003eCan the A1 Mini print ABS?\u003c\/h3\u003e\n\u003cp\u003eNo — Bambu Lab lists ABS as not recommended. It is open frame with an 80°C bed, so ABS parts warp and split. Use an enclosed printer such as the \u003ca href=\"\/products\/bambu-lab-p1s\"\u003eP1S\u003c\/a\u003e for ABS and ASA.\u003c\/p\u003e\n\u003ch3\u003eHow big is 180 mm really?\u003c\/h3\u003e\n\u003cp\u003eAbout the size of a 1.25 L drink bottle laid on its side. Plenty for miniatures, tools, brackets and organisers; not enough for a helmet in one piece.\u003c\/p\u003e\n\u003ch3\u003eWhich AMS works with the A1 Mini?\u003c\/h3\u003e\n\u003cp\u003eOnly the \u003ca href=\"\/products\/bambu-lab-ams-lite\"\u003eAMS Lite\u003c\/a\u003e, four spools. The \u003ca href=\"\/products\/bambu-lab-a1-mini-combo\"\u003eA1 Mini Combo\u003c\/a\u003e includes one, and buying them together costs less than adding it later.\u003c\/p\u003e\n\u003ch3\u003eDo you support the A1 Mini in Australia?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller and an authorised service and repair centre, with technical support and warranty assistance handled locally from Regents Park, Sydney. We also stock \u003ca href=\"\/products\/bambu-hotend-a1-series\"\u003eA1 series hotends\u003c\/a\u003e and spare parts.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications taken from Bambu Lab's official A1 mini spec sheet. Figures are subject to change by the manufacturer; check the current price and availability in the buy panel on this page.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995289948458,"sku":"PF002-M-AU","price":319.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998419919146-64d0ae3e8bcf8cc0c0845325c5f735bf62ce798a.jpg?v=1769702762"},{"product_id":"bambu-lab-a1-mini-combo","title":"Bambu Lab A1 Mini Combo 3D Printer with AMS Lite","description":"\u003ch2\u003eBambu Lab A1 mini Combo — small-footprint multi-colour printing\u003c\/h2\u003e\n\u003cp\u003eThe A1 mini Combo pairs the Bambu Lab A1 mini with the AMS lite four-spool changer, so multi-colour and multi-material printing works out of the box with nothing else to buy. It is the smallest and most affordable way into the Bambu Lab ecosystem, and it is genuinely a desktop machine — the printer body is 347 × 315 × 365 mm and weighs 5.5 kg.\u003c\/p\u003e\n\u003cp\u003eSold and supported by 3D BRO, a certified Bambu Lab reseller and one of the first officially authorised Bambu Lab service and repair centres in Australia. Dispatched from our Regents Park warehouse in Sydney.\u003c\/p\u003e\n\n\u003ch3\u003eWho this suits — and who it does not\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA good fit if\u003c\/strong\u003e you are printing miniatures, tabletop terrain, small functional parts, prototypes, toys or gifts; you are new to 3D printing and want automatic calibration rather than manual levelling; desk or shelf space is limited; or you want four-colour printing at the lowest entry price.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsider the full-size A1 or an enclosed P-series machine instead if\u003c\/strong\u003e you need a build area larger than 180 mm in any direction, or you intend to print ABS, ASA, PC, PA or fibre-reinforced filaments. The A1 mini is an open-frame printer and Bambu Lab lists those materials as \u003cstrong\u003enot recommended\u003c\/strong\u003e for it — see the material table below.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is in the Combo\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab A1 mini printer\u003c\/li\u003e\n\u003cli\u003eAMS lite — four-spool automatic material system for multi-colour and multi-material printing\u003c\/li\u003e\n\u003cli\u003e0.4 mm stainless steel nozzle fitted; 0.2 mm, 0.6 mm and 0.8 mm nozzles available separately\u003c\/li\u003e\n\u003cli\u003eBambu textured PEI build plate, tool kit and starter accessories as supplied by Bambu Lab\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease allow bench space for the AMS lite alongside the printer — it is a separate unit, not built into the frame.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eA1 mini\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e180 × 180 × 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax hot end temperature\u003c\/td\u003e\n\u003ctd\u003e300 °C (all-metal hot end)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax build plate temperature\u003c\/td\u003e\n\u003ctd\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax toolhead speed\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax toolhead acceleration\u003c\/td\u003e\n\u003ctd\u003e10,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eStainless steel, 0.4 mm included (0.2 \/ 0.6 \/ 0.8 mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder gears\u003c\/td\u003e\n\u003ctd\u003eHardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible build plates\u003c\/td\u003e\n\u003ctd\u003eBambu Textured PEI, Smooth PEI, Dual-Texture PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e2.4 inch 320 × 240 IPS touch screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, Bambu-Bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003emicroSD card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera\u003c\/td\u003e\n\u003ctd\u003eLow rate camera up to 1080p, timelapse supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensors\u003c\/td\u003e\n\u003ctd\u003eFilament run-out, filament odometry, filament tangle, power loss recovery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e347 × 315 × 365 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e5.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e100–240 VAC, 50\/60 Hz, 150 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlicer\u003c\/td\u003e\n\u003ctd\u003eBambu Studio (macOS, Windows); accepts standard G-code from third-party slicers with some feature limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSource: Bambu Lab official A1 mini technical specifications.\u003c\/p\u003e\n\n\u003ch3\u003eMaterials — what it is rated for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRating\u003c\/th\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIdeal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNot recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABS, ASA, PC, PA, PET, carbon-fibre and glass-fibre reinforced polymers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis is Bambu Lab's own rating, not ours. The A1 mini has no enclosure, so high-shrinkage and high-temperature materials are prone to warping and delamination, and abrasive fibre-filled filaments will wear a standard stainless nozzle quickly. If those materials matter to you, talk to us before ordering — an enclosed machine will serve you better.\u003c\/p\u003e\n\n\u003ch3\u003eDelivery, warranty and support\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDispatched from our Regents Park warehouse in Sydney, Monday to Saturday. Delivery is typically 1–3 business days within Australia depending on your address.\u003c\/li\u003e\n\u003cli\u003e3D printers are not included in free shipping. Delivery is $15 per printer within the Sydney area and $30 per printer to the rest of Australia.\u003c\/li\u003e\n\u003cli\u003eCovered by the official Bambu Lab warranty. As an authorised Bambu Lab service and repair centre, we handle warranty assessment and repair locally in Sydney rather than sending machines overseas.\u003c\/li\u003e\n\u003cli\u003eLocal pickup is available — check the current pickup options at checkout.\u003c\/li\u003e\n\u003cli\u003eQuestions before or after purchase? Our Sydney team can help with setup, filament choice and technical support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the AMS lite included?\u003c\/strong\u003e\u003cbr\u003eYes. \"Combo\" means the AMS lite four-spool unit ships with the printer. There is nothing extra to buy for four-colour printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is this different from the A1 Combo?\u003c\/strong\u003e\u003cbr\u003eThe A1 mini has a 180 × 180 × 180 mm build volume; the full-size A1 is 256 × 256 × 256 mm. Both are open-frame and both come with AMS lite in Combo form. Choose the mini for space and price, the A1 for larger parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it print ABS or carbon fibre filament?\u003c\/strong\u003e\u003cbr\u003eBambu Lab lists ABS, ASA, PC, PA, PET and fibre-reinforced filaments as not recommended for the A1 mini. We would not advise buying it for those materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes multi-colour printing waste filament?\u003c\/strong\u003e\u003cbr\u003eYes — every colour change purges a small amount of material. This is normal for all AMS-style systems. Bambu Studio shows the estimated waste before you print.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995290177834,"sku":"PF002-M+SA005-AU","price":529.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998420082986-e6a057e6706d8a3ccac8957aa176cdfbe22b395a.webp?v=1769703075"},{"product_id":"bambu-lab-p1s","title":"Bambu Lab P1S","description":"\u003csection class=\"seo-buying-summary\" data-seo-batch=\"20260803\"\u003e\u003ch2\u003eBuy Bambu Lab P1S in Australia\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab P1S is an enclosed CoreXY 3D printer with a 256 × 256 × 256 mm build volume and toolhead speeds up to 500 mm\/s. It is a proven choice for hobbyists, schools, workshops and small businesses that want fast, consistent printing in a compact enclosure.\u003c\/p\u003e\n\u003cp\u003eOrder from 3D BRO for Sydney dispatch and local Australian support. For automatic multi-colour and multi-material printing, \u003ca href=\"\/products\/bambu-lab-p1s-combo\"\u003ecompare the P1S Combo with AMS included\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n\u003ch2\u003eWhy the P1S is still the default recommendation\u003c\/h2\u003e\n\u003cp\u003eThe P1S is the machine most people should buy first. It is enclosed, which puts ABS and ASA within reach; it is a CoreXY, so it is fast without shaking itself apart; and it has been in the field long enough that the profiles, the spare parts and the community answers all exist. Nothing about it is experimental.\u003c\/p\u003e\n\u003cp\u003eWhat you give up against the newer \u003ca href=\"\/products\/bambu-lab-p2s\"\u003eP2S\u003c\/a\u003e is the screen (a 2.7-inch monochrome LCD rather than a colour touchscreen), the camera (720p at 0.5 fps rather than 1080p at 30 fps with AI defect detection), and the ability to run abrasive fibre-reinforced filaments — the P1S ships with a stainless steel nozzle and Bambu Lab does not recommend carbon- or glass-fibre materials on it.\u003c\/p\u003e\n\u003ch2\u003eWhat the enclosure does and does not do\u003c\/h2\u003e\n\u003cp\u003eThe P1S enclosure is passive. It traps the heat the bed gives off, which is enough to make ABS and ASA workable and to keep draughts off tall PLA prints. It is not an actively heated chamber — that is an H-series feature (see the \u003ca href=\"\/products\/bambu-lab-h2s\"\u003eH2S\u003c\/a\u003e) — so very large ABS parts still need care with placement and door position.\u003c\/p\u003e\n\u003ch2\u003eWho should choose the P1S\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the P1S if\u003c\/strong\u003e you want a dependable enclosed printer for PLA, PETG, TPU, ABS and ASA and value proven reliability over the newest hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-p1s-combo\"\u003eP1S Combo\u003c\/a\u003e if\u003c\/strong\u003e you want four-colour printing included — same printer, with an AMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-p2s\"\u003eP2S\u003c\/a\u003e if\u003c\/strong\u003e you want to print carbon-fibre filaments, or want the colour touchscreen and AI camera.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-a1\"\u003eA1\u003c\/a\u003e if\u003c\/strong\u003e you print PLA and PETG only and would rather spend less on an open-frame machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest value option:\u003c\/strong\u003e the \u003ca href=\"\/products\/bambu-lab-p1s-combo-official-refurbished\"\u003eofficial refurbished P1S Combo\u003c\/a\u003e — factory-certified, with AMS and full warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBambu Lab P1S key specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFully enclosed, passively heated (no active chamber heater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.6 and 0.8 mm optional; stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, ABS, ASA, PVA, PET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapable, with care\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePA, PC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNot recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarbon- or glass-fibre reinforced filaments (abrasive; the stock nozzle is stainless steel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e389 × 389 × 458 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12.95 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.7-inch 192 × 64 monochrome LCD (not a touchscreen)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, Bluetooth, Bambu-Bus; micro SD card storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChamber monitoring camera, 1280 × 720 at 0.5 fps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMulti-colour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCompatible with the AMS, AMS 2 Pro and AMS HT; up to four units for 16 filaments. No AMS is included with this listing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan the P1S print ABS and ASA?\u003c\/h3\u003e\n\u003cp\u003eYes. The enclosure traps enough heat for both, which is the main practical difference between the P1S and an open-frame printer such as the A1. Ventilate the room — ABS in particular has a strong odour.\u003c\/p\u003e\n\u003ch3\u003eCan the P1S print carbon fibre filament?\u003c\/h3\u003e\n\u003cp\u003eBambu Lab lists carbon- and glass-fibre reinforced materials as not recommended for the P1S: the stock nozzle is stainless steel and abrasive filaments wear it quickly. If fibre-reinforced materials are part of your plan, the \u003ca href=\"\/products\/bambu-lab-p2s\"\u003eP2S\u003c\/a\u003e ships with a hardened steel nozzle and supports them.\u003c\/p\u003e\n\u003ch3\u003eDoes the P1S have a touchscreen?\u003c\/h3\u003e\n\u003cp\u003eNo. It has a 2.7-inch monochrome LCD with buttons. Day-to-day control is normally through Bambu Studio or the Bambu Handy app; the colour touchscreen is a P2S and H-series feature.\u003c\/p\u003e\n\u003ch3\u003eP1S or P1S Combo?\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/bambu-lab-p1s-combo\"\u003eCombo\u003c\/a\u003e is the same printer with an AMS included for automatic four-colour printing. Buying them together costs less than adding an AMS later.\u003c\/p\u003e\n\u003ch3\u003eDo you support the P1S in Australia?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller and an authorised service and repair centre, with technical support and warranty assistance handled locally from Regents Park, Sydney. We also stock \u003ca href=\"\/products\/bambu-hotend-p1-series-complete-hotend\"\u003eP1 series hotends\u003c\/a\u003e and other spare parts.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications taken from Bambu Lab's official P1S spec sheet. Figures are subject to change by the manufacturer; check the current price and availability in the buy panel on this page.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995290374442,"sku":"PF001-U-AU","price":599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998420246826-c4f0a6419a38bf5a18462164ee7c2c2d6f6b7b7a.jpg?v=1769702771"},{"product_id":"bambu-lab-p1s-combo","title":"Bambu Lab P1S Combo CoreXY 3D Printer with AMS","description":"\u003ch2\u003eBambu Lab P1S Combo — enclosed CoreXY with AMS included\u003c\/h2\u003e\n\u003cp\u003eThe P1S Combo is the complete multi-material package: the fully enclosed P1S printer plus a four-spool Bambu Lab AMS, with nothing else to buy. The enclosure and activated carbon filter make it a far better choice than an open-frame machine for ABS and ASA, which warp and emit odour when printed in open air.\u003c\/p\u003e\n\u003cp\u003eSold and supported by 3D BRO, a certified Bambu Lab reseller and one of the first officially authorised Bambu Lab service and repair centres in Australia. Dispatched from our Regents Park warehouse in Sydney.\u003c\/p\u003e\n\n\u003ch3\u003eWho this suits — and who it does not\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA good fit if\u003c\/strong\u003e you print functional parts in ABS, ASA, PETG or PLA; you want four-colour or multi-material printing without manual filament swaps; you are moving up from an open-frame printer; or you need a reliable enclosed machine for small production runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLook at the H2 or P2 series instead if\u003c\/strong\u003e you need a build volume larger than 256 mm, dual-nozzle printing, or active chamber heating for high-temperature engineering polymers. The P1S enclosure is passive — see the specification table.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is in the Combo\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab P1S printer, fully enclosed\u003c\/li\u003e\n\u003cli\u003eBambu Lab AMS — four-spool automatic material system\u003c\/li\u003e\n\u003cli\u003e0.4 mm stainless steel nozzle fitted; 0.2 mm, 0.6 mm and 0.8 mm nozzles available separately\u003c\/li\u003e\n\u003cli\u003eBambu build plate, activated carbon filter, tool kit and starter accessories as supplied by Bambu Lab\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAllow bench space for the AMS — it normally sits on top of the printer, so check your shelf clearance.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eP1S\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShell\u003c\/td\u003e\n\u003ctd\u003eFully enclosed (plastic and glass)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChamber temperature control\u003c\/td\u003e\n\u003ctd\u003eChamber temperature regulator fan (closed loop). \u003cstrong\u003eNo active chamber heating\u003c\/strong\u003e — the chamber warms passively from the heatbed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir filtration\u003c\/td\u003e\n\u003ctd\u003eActivated carbon filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHot end\u003c\/td\u003e\n\u003ctd\u003eAll-metal, max 300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eStainless steel, 0.4 mm included (0.2 \/ 0.6 \/ 0.8 mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax build plate temperature\u003c\/td\u003e\n\u003ctd\u003e100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax toolhead speed\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax toolhead acceleration\u003c\/td\u003e\n\u003ctd\u003e20 m\/s² (20,000 mm\/s²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible build plates\u003c\/td\u003e\n\u003ctd\u003eBambu Textured PEI, Cool Plate, Engineering Plate, High Temperature Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChamber camera\u003c\/td\u003e\n\u003ctd\u003eLow rate camera 1280 × 720 at 0.5 fps, timelapse supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament run-out sensor\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e389 × 389 × 458 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e12.95 kg (printer only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e100–240 VAC, 50\/60 Hz, 1000 W at 220 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSource: Bambu Lab official P1S product specifications (Australian store).\u003c\/p\u003e\n\n\u003ch3\u003eMaterials — what it is rated for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRating\u003c\/th\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIdeal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA, PET, ABS, ASA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePA, PC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis is Bambu Lab's own rating. PA and PC print on the P1S but benefit from a heated chamber, which the P1S does not have — expect to tune settings and accept some limitation on tall parts. Abrasive fibre-reinforced filaments require a hardened nozzle, sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eDelivery, warranty and support\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDispatched from our Regents Park warehouse in Sydney, Monday to Saturday. Delivery is typically 1–3 business days within Australia depending on your address.\u003c\/li\u003e\n\u003cli\u003e3D printers are not included in free shipping. Delivery is $15 per printer within the Sydney area and $30 per printer to the rest of Australia.\u003c\/li\u003e\n\u003cli\u003eCovered by the official Bambu Lab warranty. As an authorised Bambu Lab service and repair centre, we assess and repair locally in Sydney rather than sending machines overseas.\u003c\/li\u003e\n\u003cli\u003eLocal pickup is available — check the current pickup options at checkout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the AMS included with the P1S Combo?\u003c\/strong\u003e\u003cbr\u003eYes. \"Combo\" means the four-spool Bambu Lab AMS ships with the printer. No separate purchase required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the P1S have a heated chamber?\u003c\/strong\u003e\u003cbr\u003eNo. It is fully enclosed and has a chamber temperature regulator fan, but there is no active chamber heater. The chamber warms passively from the heatbed, which is enough for ABS and ASA but not for high-temperature engineering polymers. If you need active chamber heating, look at the H2 series.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use third-party filament in the AMS?\u003c\/strong\u003e\u003cbr\u003eUsually. The AMS is designed around 1.75 mm filament on spools that match Bambu Lab's dimensions. Oversized, undersized or cardboard spools may not feed reliably, and very flexible TPU is not supported through the AMS. Third-party materials often need flow and temperature calibration in Bambu Studio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe printer is on backorder — how long is the wait?\u003c\/strong\u003e\u003cbr\u003eWe ship backorders in the order they are received as stock arrives. Contact us for a current queue estimate before ordering if timing matters.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995290538282,"sku":"PF001-U+SA001-AU","price":829.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998420410666-a85ad9441c0a04a64650f69bae5e996f921820f8.png?v=1769702957"},{"product_id":"bambu-lab-h2d-combo","title":"Bambu Lab H2D Combo","description":"\u003cp\u003e\u003cstrong\u003eThe Bambu Lab H2D Combo pairs the large-format dual-nozzle H2D with an AMS 2 Pro, so multi-colour and multi-material printing is automatic and the filament is kept dry between jobs.\u003c\/strong\u003e Two nozzles at 350°C over a 120°C bed in an actively heated 65°C chamber, plus four AMS slots that can be expanded to twenty-four.\u003c\/p\u003e\n\u003cp\u003eBought from 3D BRO — a Bambu Lab authorised reseller and Australia's authorised service centre — with local warranty assistance and technical support from our Sydney team.\u003c\/p\u003e\n\u003ch2\u003eWhat the AMS 2 Pro adds\u003c\/h2\u003e\n\u003cp\u003eThe AMS 2 Pro holds four spools and feeds them to the printer automatically, so a four-colour model runs unattended. Its built-in drying function matters more than the colour count for anyone printing PA, PET or PC: those materials absorb moisture from the air and print badly once they have, and a heated AMS keeps them usable between jobs instead of requiring a separate dryer.\u003c\/p\u003e\n\u003cp\u003eBecause the H2D has two nozzles, the AMS is not the only path to a second material. A common production setup is model material through the AMS on one nozzle and a dedicated support material on the other, which removes most of the purge waste that multi-material printing normally generates.\u003c\/p\u003e\n\u003ch2\u003eWho the H2D Combo is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the H2D Combo if\u003c\/strong\u003e you want both the engineering capability of a heated-chamber dual-nozzle machine and hands-off multi-colour printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-h2d-basic\"\u003eH2D on its own\u003c\/a\u003e if\u003c\/strong\u003e you print single-material functional parts and would rather add an AMS later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsider the \u003ca href=\"\/products\/bambu-lab-p2s-combo\"\u003eP2S Combo\u003c\/a\u003e instead if\u003c\/strong\u003e 256 mm is enough build volume and you do not need a heated chamber or a second nozzle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsider the \u003ca href=\"\/products\/bambu-lab-h2d-laser-full-combo-40w\"\u003eH2D Laser Full Combo 40W\u003c\/a\u003e if\u003c\/strong\u003e you also want laser engraving and cutting on the same machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy the heated chamber matters\u003c\/h2\u003e\n\u003cp\u003eActive chamber heating to 65°C keeps a growing part near a consistent temperature, which is what prevents the warping and layer cracking that make ABS, ASA and fibre-reinforced materials unreliable on printers that only trap residual bed heat. Combined with the 350°C all-metal hotend and hardened steel nozzle, that puts PA, PC, PPS and carbon- or glass-fibre reinforced grades within normal use rather than at the edge of what the machine can do.\u003c\/p\u003e\n\u003ch2\u003eBambu Lab H2D Combo key specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume, single nozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e325 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume, dual nozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal two-nozzle workspace\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEnclosed, active heating up to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported; hardened steel, all-metal hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax flow rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 mm³\/s standard hotend; 65 mm³\/s with the optional high-flow hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, and carbon- or glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild plates\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTextured PEI, Smooth PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e492 × 514 × 626 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e31 kg (printer only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch 720 × 1280 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (IEEE 802.11 a\/b\/g\/n), USB port, 8 GB built-in storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCameras\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLive view, nozzle and toolhead cameras, all 1920 × 1080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded in this listing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eH2D printer and one \u003ca href=\"\/products\/bambu-lab-ams-2-pro\"\u003eAMS 2 Pro\u003c\/a\u003e (4 slots, with drying)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMulti-colour expansion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 4 × AMS 2 Pro and 8 × AMS HT, 24 filament slots total. AMS Lite is not compatible.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many colours can the H2D Combo print?\u003c\/h3\u003e\n\u003cp\u003eFour out of the box with the included AMS 2 Pro. Adding further AMS units takes it to 24 filament slots; the practical limit for a single job also depends on the materials involved and how much purging each change requires.\u003c\/p\u003e\n\u003ch3\u003eDoes the AMS 2 Pro dry filament?\u003c\/h3\u003e\n\u003cp\u003eYes. Drying is built in, which is the main reason it suits PA, PET and PC — those absorb moisture from the air and print poorly once they have.\u003c\/p\u003e\n\u003ch3\u003eCan I run TPU through the AMS?\u003c\/h3\u003e\n\u003cp\u003eSofter flexibles are not suited to a standard AMS path. Bambu Lab's TPU for AMS is the grade intended for it; softer TPU is better fed from an external spool holder, and on the H2D you can dedicate the second nozzle to it.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference from the H2D Basic?\u003c\/h3\u003e\n\u003cp\u003eOnly the AMS. The \u003ca href=\"\/products\/bambu-lab-h2d-basic\"\u003eH2D Basic\u003c\/a\u003e is the same printer without one.\u003c\/p\u003e\n\u003ch3\u003eDo you support the H2D in Australia?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller and an authorised service and repair centre, with technical support and warranty assistance handled locally from Regents Park, Sydney.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications taken from Bambu Lab's official H2D spec sheet. Figures are subject to change by the manufacturer; check the current price and availability in the buy panel on this page.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995294109994,"sku":"PF003-D+SA007-AU1","price":2799.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998421360938-e60acf97f3f445e074c13eb722659412d65e6ae8.jpg?v=1769702779"},{"product_id":"bambu-lab-h2d-laser-full-combo-40w","title":"Bambu Lab H2D Laser Full Combo 40W","description":"\u003cp\u003e\u003cstrong\u003eThe Bambu Lab H2D Laser Full Combo 40W is the H2D Laser Edition with the 40 W laser module, the blade cutting module and an AMS 2 Pro — a dual-nozzle engineering 3D printer, a laser engraver and cutter, and an automatic multi-colour system in one enclosed machine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBought from 3D BRO — a Bambu Lab authorised reseller and Australia's authorised service centre — with local warranty assistance and technical support from our Sydney team.\u003c\/p\u003e\n\u003ch2\u003eWhat the 40W module does that the 10W does not\u003c\/h2\u003e\n\u003cp\u003ePower changes what the laser is for. At 40 W it cuts basswood plywood up to 15 mm and engraves at up to 1000 mm\/s; the 10 W module on the \u003ca href=\"\/products\/bambu-lab-h2s-laser-10w\"\u003eH2S Laser Full Combo\u003c\/a\u003e cuts to 5 mm at up to 400 mm\/s. If you are cutting plywood, acrylic or leather for products rather than marking surfaces, that difference is the whole decision.\u003c\/p\u003e\n\u003cp\u003eThe separate blade cutting module handles materials a laser should not touch — vinyl, card, sticker stock — with adjustable blade pressure from 50 to 600 gf, and takes a pen holder for plotting and drawing.\u003c\/p\u003e\n\u003ch2\u003eStill a full engineering 3D printer\u003c\/h2\u003e\n\u003cp\u003eNothing is traded away on the printing side. Two nozzles reach 350°C over a 120°C heatbed inside an actively heated 65°C chamber, which is what makes ABS, ASA, PC, PA and carbon- or glass-fibre reinforced materials print reliably instead of warping or delaminating. The included AMS 2 Pro adds four filament slots with drying.\u003c\/p\u003e\n\u003ch2\u003eSafety and ventilation\u003c\/h2\u003e\n\u003cp\u003eThe laser module is Class 4; the machine as a whole operates as Class 1 while the enclosure, door sensor and laser-safe window are intact and working. A safety key and an emergency stop button are included, and a ventilation pipe is supplied — laser cutting produces smoke and fumes and the machine must be vented outdoors or through suitable extraction. Plan the install before the machine arrives; if you would like advice on the setup for your space, contact our Sydney team.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003ch3\u003e3D printing\u003c\/h3\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume, single nozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e325 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume, dual nozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEnclosed, active heating up to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported; hardened steel, all-metal hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, and carbon- or glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eLaser and cutting\u003c\/h3\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eLaser power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 W ± 2 W, semiconductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWavelength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e455 nm ± 5 nm blue light (engraving); 850 nm ± 5 nm infrared (height measurement)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEngraving area\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e310 × 250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax engraving speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax cutting thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 mm (basswood plywood)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eXY positioning accuracy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBlade cutting module\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 × 285 mm area, up to 0.5 mm thickness, 45° × 0.35 mm blade, 50–600 gf pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLaser safety class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClass 4 module; Class 1 as an enclosed system with protection intact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir purification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eG3 pre-filter, H12 HEPA filter, granulated coconut shell activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLaser module operating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0°C to 35°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMachine\u003c\/h3\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e492 × 514 × 626 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e31 kg (printer only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch 720 × 1280 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (IEEE 802.11 a\/b\/g\/n), USB port, 8 GB built-in storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCameras\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLive view, nozzle and toolhead cameras at 1920 × 1080, plus the BirdsEye camera at 3264 × 2448 fitted to Laser Edition machines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded in this listing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eH2D Laser Edition printer, 40 W laser module, cutting module with pen holder, laser platform, cutting platform, safety key, emergency stop button, ventilation pipe, laser and cutting sample materials, build plate, spool holder, accessory box, and one \u003ca href=\"\/products\/bambu-lab-ams-2-pro\"\u003eAMS 2 Pro\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat can the 40W laser cut?\u003c\/h3\u003e\n\u003cp\u003eBambu Lab rates it to 15 mm in basswood plywood. Real cutting depth depends on the material, its density and moisture content, and how many passes you use; other woods, acrylic and leather all behave differently.\u003c\/p\u003e\n\u003ch3\u003eDoes it need ventilation?\u003c\/h3\u003e\n\u003cp\u003eYes. Laser engraving and cutting produce smoke and fumes. The machine has a built-in air purification stage and ships with a ventilation pipe, but it should be vented outdoors or into suitable extraction, not run in a closed room.\u003c\/p\u003e\n\u003ch3\u003eIs it safe to use at home or in a classroom?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure, laser-safe window and door sensor make it a Class 1 system in normal use, and it ships with a safety key and emergency stop. It still requires supervision, ventilation and sensible material choices — some plastics release harmful fumes when lasered and should never be cut.\u003c\/p\u003e\n\u003ch3\u003eCan I use it purely as a 3D printer?\u003c\/h3\u003e\n\u003cp\u003eYes. The laser and cutting modules are removable; with the print toolhead fitted it is a standard H2D.\u003c\/p\u003e\n\u003ch3\u003eDo you support this machine in Australia?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller and an authorised service and repair centre, with technical support and warranty assistance handled locally from Regents Park, Sydney.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications taken from Bambu Lab's official H2D spec sheet. Figures are subject to change by the manufacturer; check the current price and availability in the buy panel on this page.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995294568746,"sku":"PF003-M+SA007+SL002-AU","price":4999.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/H2D_Laser.jpg?v=1767315446"},{"product_id":"bambu-lab-h2d-pro","title":"Bambu Lab H2D Pro Professional Dual-Nozzle 3D Printer","description":"\u003cp\u003eThe \u003cstrong\u003eBambu Lab H2D Pro\u003c\/strong\u003e is a professional dual-nozzle 3D printer built for secure, repeatable production in managed IT environments. It shares the H2D print platform — 350 °C nozzles, 65 °C active chamber heating, 120 °C heatbed and the same build volume — and adds tungsten-carbide nozzles, an included Vision Encoder, enterprise network controls and a high-temperature accessory bundle.\u003c\/p\u003e\n\u003cp\u003eDesigned for policy-controlled networks, the H2D Pro adds RJ45 Ethernet, WPA2-Enterprise (802.1X) authentication, a removable network module and hardware kill switches for Wi-Fi and Ethernet, supporting air-gapped and high-trust deployments.\u003c\/p\u003e\n\u003cp\u003eSold and supported by 3D BRO, a certified Bambu Lab reseller and one of the first officially authorised Bambu Lab service and repair centres in Australia.\u003c\/p\u003e\n\u003ch2\u003eH2D Pro vs H2D — what actually differs\u003c\/h2\u003e\n\u003cp\u003eThe H2D Pro is not a faster or hotter printer than the standard H2D. Bambu Lab's published specifications for the two machines are identical on build volume, nozzle temperature, chamber heating, heatbed temperature and air filtration. What you are paying for is nozzle material, precision hardware, enterprise networking and the bundled accessories.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eH2D Pro\u003c\/th\u003e\n\u003cth\u003eH2D\u003c\/th\u003e\n\u003cth\u003eWhy it matters\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTungsten carbide dual nozzles\u003c\/td\u003e\n\u003ctd\u003eHardened steel dual nozzles\u003c\/td\u003e\n\u003ctd\u003eLonger nozzle life with abrasive fibre-reinforced filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVision Encoder\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eSold separately\u003c\/td\u003e\n\u003ctd\u003eSupports 50 µm motion accuracy for repeatable dimensional precision\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork security\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWPA2-Enterprise (802.1X), RJ45 Ethernet, removable network module, hardware kill switches\u003c\/td\u003e\n\u003ctd\u003eWi-Fi\u003c\/td\u003e\n\u003ctd\u003eMeets enterprise IT policy and air-gapped deployment requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnterprise integration support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIncluded — Bambu Lab support for custom fleet management and IT integration\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003eRelevant for large multi-printer deployments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded accessories\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAMS 2 Pro + AMS HT + Vision Encoder plate + emergency stop button\u003c\/td\u003e\n\u003ctd\u003eVaries by bundle\u003c\/td\u003e\n\u003ctd\u003eReady for multi-material, high-temperature and high-precision workflows out of the box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIdentical on both machines\u003c\/h3\u003e\n\u003cp\u003eThese are \u003cstrong\u003enot\u003c\/strong\u003e reasons to choose the Pro. Bambu Lab lists the same figures for the standard H2D:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuild volume — 325 × 320 × 325 mm single nozzle, 300 × 320 × 325 mm dual nozzle\u003c\/li\u003e\n\u003cli\u003eMax nozzle temperature — 350 °C\u003c\/li\u003e\n\u003cli\u003eActive chamber heating — supported, up to 65 °C\u003c\/li\u003e\n\u003cli\u003eMax heatbed temperature — 120 °C\u003c\/li\u003e\n\u003cli\u003eMax toolhead speed — 1000 mm\/s\u003c\/li\u003e\n\u003cli\u003eAir filtration — G3 pre-filter, H12 HEPA, activated carbon (granulated coconut shell)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSource: Bambu Lab official H2D and H2D Pro technical specifications.\u003c\/p\u003e\n\u003ch3\u003eKey capabilities\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-temperature dual-nozzle printing\u003c\/strong\u003e — 350 °C nozzles with a 65 °C active chamber for fibre-reinforced and advanced thermoplastics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision motion\u003c\/strong\u003e — the included Vision Encoder supports 50 µm motion accuracy across the build area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure connectivity\u003c\/strong\u003e — WPA2-Enterprise, 802.1X, Ethernet, removable network module and hardware kill switches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial filtration\u003c\/strong\u003e — multi-stage G3 pre-filter, H12 HEPA and activated carbon for particulate and VOC control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational safety\u003c\/strong\u003e — emergency stop button, enclosed build chamber and power-loss recovery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBambu Lab H2D Pro key specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume, single nozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e325 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume, dual nozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEnclosed, active heating up to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported; tungsten carbide, all-metal hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax flow rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, and carbon- or glass-fibre reinforced grades including PPA-CF\/GF and PPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild plates\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTextured PEI, Smooth PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e492 × 514 × 626 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e31 kg (printer only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch 720 × 1280 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, plus RJ45 Ethernet at 100 Mbps full duplex, WPA2-Enterprise (802.1X), removable network module and hardware kill switches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCameras\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLive view, nozzle and toolhead cameras, all 1920 × 1080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded in this listing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eH2D Pro printer, \u003ca href=\"\/products\/bambu-lab-ams-2-pro\"\u003eAMS 2 Pro\u003c\/a\u003e, \u003ca href=\"\/products\/bambu-lab-ams-ht\"\u003eAMS HT\u003c\/a\u003e, Vision Encoder plate and emergency stop button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShould you buy the Pro?\u003c\/h3\u003e\n\u003cp\u003eChoose the H2D Pro if your IT department requires 802.1X or wired networking, if you run abrasive filaments continuously and want tungsten-carbide nozzles from day one, or if you want the Vision Encoder and high-temperature AMS bundle included rather than added later. If none of those apply, the standard \u003ca href=\"\/products\/bambu-lab-h2d-basic\"\u003eH2D\u003c\/a\u003e prints the same parts — talk to us and we will tell you honestly which one fits.\u003c\/p\u003e\n\u003ch3\u003eDelivery, warranty and support\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDispatched from our Regents Park warehouse in Sydney. 3D printers are not included in free shipping: delivery is $15 per printer within the Sydney area and $30 per printer to the rest of Australia.\u003c\/li\u003e\n\u003cli\u003eCovered by the official Bambu Lab warranty, assessed and repaired locally in Sydney as an authorised Bambu Lab service and repair centre.\u003c\/li\u003e\n\u003cli\u003eEnterprise and education purchase orders welcome — contact us for quotes, lead times and deployment support.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995296469290,"sku":"PF003-E+SA007+SA008-HV","price":4699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998422638890-fbc5c449fb8a313a1c7c22f24058e52583423142.png?v=1769702977"},{"product_id":"bambu-lab-h2s","title":"Bambu Lab H2S","description":"\u003csection class=\"seo-buying-summary\" data-seo-batch=\"20260803\"\u003e\u003ch2\u003eBuy Bambu Lab H2S in Australia\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab H2S is a large-format enclosed 3D printer with a 340 × 320 × 340 mm build volume, a 350°C nozzle and an actively heated chamber. It suits makers, studios and businesses that need larger functional parts, engineering materials and reliable high-speed production.\u003c\/p\u003e\n\u003cp\u003eOrder from 3D BRO for Sydney dispatch and local Australian support. Choose the standalone H2S if you already have a compatible material system, or \u003ca href=\"\/products\/bambu-lab-h2s-combo\"\u003ecompare the H2S Combo\u003c\/a\u003e for multi-colour printing.\u003c\/p\u003e\u003c\/section\u003e\n\u003ch2\u003eWhat the H2S is, in one paragraph\u003c\/h2\u003e\n\u003cp\u003eThe H2S is the single-nozzle machine in Bambu Lab's H2 family. It uses the same chassis, heated chamber and motion platform as the dual-nozzle \u003ca href=\"\/products\/bambu-lab-h2d-basic\"\u003eH2D\u003c\/a\u003e, but with one toolhead — which is why it gives you the largest single-nozzle build volume in the range at 340 × 320 × 340 mm. If your work is large single-material parts rather than multi-material assemblies, that is the trade you want.\u003c\/p\u003e\n\u003ch2\u003eWhy the heated chamber changes what you can print\u003c\/h2\u003e\n\u003cp\u003eEnclosures on most desktop printers are passive: they trap whatever heat the bed radiates. The H2S heats its chamber actively to 65°C, holding the whole part near a consistent temperature as it grows. That is the difference between an ABS or ASA part that warps off the plate at 200 mm tall and one that finishes clean.\u003c\/p\u003e\n\u003cp\u003eThe 350°C all-metal hotend with a hardened steel nozzle extends that to abrasive and high-temperature materials — PA, PC, PPS and carbon- or glass-fibre reinforced grades are all on Bambu Lab's supported list, with no nozzle upgrade needed.\u003c\/p\u003e\n\u003ch2\u003eWho should choose the H2S\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the H2S if\u003c\/strong\u003e you want the largest single-nozzle build volume in the H2 family and print mostly one material per job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-h2s-combo\"\u003eH2S Combo\u003c\/a\u003e if\u003c\/strong\u003e you want automatic multi-colour printing and filament drying included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-h2d-basic\"\u003eH2D\u003c\/a\u003e instead if\u003c\/strong\u003e a second nozzle matters more than the extra build width — dedicated support material and low-purge two-material printing are what it buys you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsider the \u003ca href=\"\/products\/bambu-lab-p2s\"\u003eP2S\u003c\/a\u003e instead if\u003c\/strong\u003e 256 mm is enough and you do not need active chamber heating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBambu Lab H2S key specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e340 × 320 × 340 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEnclosed, active heating up to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported; hardened steel, all-metal hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax flow rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 mm³\/s standard hotend; 65 mm³\/s with the optional high-flow hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, and carbon- or glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild plates\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTextured PEI, Smooth PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir filtration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eG3 pre-filter, H12 HEPA, granulated coconut shell activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e492 × 514 × 626 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch 720 × 1280 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (IEEE 802.11 a\/b\/g\/n). Wired Ethernet is not available on this model.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCameras\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLive view camera 1920 × 1080; toolhead camera 1600 × 1200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMulti-colour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSupports up to 4 × AMS 2 Pro and 8 × AMS HT (24 filament slots). No AMS is included with this listing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the H2S and the H2D?\u003c\/h3\u003e\n\u003cp\u003eOne nozzle versus two. The H2S has the larger single-nozzle build volume (340 mm wide against 325 mm); the \u003ca href=\"\/products\/bambu-lab-h2d-basic\"\u003eH2D\u003c\/a\u003e gives up some of that width for a second toolhead, which lets you run a dedicated support material or a second colour without a purge tower.\u003c\/p\u003e\n\u003ch3\u003eCan the H2S print ABS and ASA reliably?\u003c\/h3\u003e\n\u003cp\u003eYes — that is what the actively heated 65°C chamber is for. It keeps the part at a stable temperature as it grows, which is what prevents the warping and layer separation these materials are known for on unheated enclosures.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a nozzle upgrade for carbon fibre filament?\u003c\/h3\u003e\n\u003cp\u003eNo. The stock nozzle is hardened steel and the hotend is all-metal, so fibre-reinforced materials are supported as supplied.\u003c\/p\u003e\n\u003ch3\u003eDoes the H2S have an Ethernet port?\u003c\/h3\u003e\n\u003cp\u003eNo. Bambu Lab lists Wi-Fi only for this model; wired Ethernet is available on the \u003ca href=\"\/products\/bambu-lab-h2d-pro\"\u003eH2D Pro\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDo you support the H2S in Australia?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller and an authorised service and repair centre, with technical support and warranty assistance handled locally from Regents Park, Sydney.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications taken from Bambu Lab's official H2S spec sheet. Figures are subject to change by the manufacturer; check the current price and availability in the buy panel on this page.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995302433066,"sku":"PF003-S-AU1","price":1799.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998423916842-ae1105a1eaa66e08db6fd83549298637fd62427f.jpg?v=1769702889"},{"product_id":"bambu-lab-h2s-combo","title":"Bambu Lab H2S Combo","description":"\u003csection class=\"seo-buying-summary\" data-seo-batch=\"20260803\"\u003e\u003ch2\u003eBuy Bambu Lab H2S Combo in Australia\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab H2S Combo combines the large-format enclosed H2S with an AMS 2 Pro for multi-colour printing and filament management. Its 340 × 320 × 340 mm build volume, 350°C nozzle and actively heated chamber make it a strong option for large prototypes, engineering parts and production work.\u003c\/p\u003e\n\u003cp\u003eOrder from 3D BRO for Sydney dispatch and local Australian support. If you do not need the included material system, \u003ca href=\"\/products\/bambu-lab-h2s\"\u003ecompare the standalone H2S\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eIf advanced multi-material printing with lower purge waste is more important than maximum single-nozzle build volume, \u003ca href=\"\/products\/bambu-lab-h2c-combo\"\u003ecompare the H2S with the Bambu Lab H2C Combo\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n\u003ch2\u003eWhat the AMS 2 Pro adds\u003c\/h2\u003e\n\u003cp\u003eThe AMS 2 Pro holds four spools and feeds them automatically, so a multi-colour job runs unattended. Its drying function is arguably the more useful half: PA, PET and PC pull moisture out of the air and print badly once they have, and a heated AMS keeps them printable between jobs rather than requiring a separate dryer and a re-dry cycle before every run.\u003c\/p\u003e\n\u003cp\u003eOn a single-nozzle machine like the H2S, each colour change means purging the old material out of the nozzle. Multi-colour printing therefore costs filament and time in a way it does not on a dual-nozzle machine — worth knowing before you plan a twelve-colour model. If low-purge multi-material work is the priority, the \u003ca href=\"\/products\/bambu-lab-h2c-combo\"\u003eH2C Combo\u003c\/a\u003e is built specifically for it.\u003c\/p\u003e\n\u003ch2\u003eWhy the heated chamber matters\u003c\/h2\u003e\n\u003cp\u003eThe H2S heats its chamber actively to 65°C rather than relying on trapped bed heat, holding the part at a stable temperature as it grows. That is what makes ABS, ASA and fibre-reinforced engineering materials print predictably at full height instead of warping or splitting between layers. The 350°C all-metal hotend with a hardened steel nozzle covers the abrasive and high-temperature end of the material range without a nozzle change.\u003c\/p\u003e\n\u003ch2\u003eWho should choose the H2S Combo\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the H2S Combo if\u003c\/strong\u003e you want the largest single-nozzle build volume in the H2 family plus hands-off multi-colour printing and filament drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-h2s\"\u003estandalone H2S\u003c\/a\u003e if\u003c\/strong\u003e you already own an AMS or print one material at a time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-h2d-combo\"\u003eH2D Combo\u003c\/a\u003e if\u003c\/strong\u003e a second nozzle — dedicated support material, low-purge two-material printing — matters more than build width.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsider the \u003ca href=\"\/products\/bambu-lab-p2s-combo\"\u003eP2S Combo\u003c\/a\u003e if\u003c\/strong\u003e 256 mm is enough build volume and you do not need active chamber heating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBambu Lab H2S Combo key specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e340 × 320 × 340 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEnclosed, active heating up to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported; hardened steel, all-metal hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax flow rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 mm³\/s standard hotend; 65 mm³\/s with the optional high-flow hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, and carbon- or glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild plates\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTextured PEI, Smooth PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir filtration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eG3 pre-filter, H12 HEPA, granulated coconut shell activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e492 × 514 × 626 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 kg (printer only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch 720 × 1280 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (IEEE 802.11 a\/b\/g\/n). Wired Ethernet is not available on this model.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCameras\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLive view camera 1920 × 1080; toolhead camera 1600 × 1200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded in this listing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eH2S printer and one \u003ca href=\"\/products\/bambu-lab-ams-2-pro\"\u003eAMS 2 Pro\u003c\/a\u003e (4 slots, with drying)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMulti-colour expansion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 4 × AMS 2 Pro and 8 × AMS HT, 24 filament slots total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many colours can the H2S Combo print?\u003c\/h3\u003e\n\u003cp\u003eFour with the included AMS 2 Pro, expandable to 24 filament slots with additional units. Because the H2S has a single nozzle, each colour change purges material, so very high colour counts cost filament and time.\u003c\/p\u003e\n\u003ch3\u003eDoes the AMS 2 Pro dry filament?\u003c\/h3\u003e\n\u003cp\u003eYes, drying is built in. That is what makes it worthwhile for PA, PET and PC, which degrade in print quality once they have absorbed moisture.\u003c\/p\u003e\n\u003ch3\u003eCan I run flexible TPU through the AMS?\u003c\/h3\u003e\n\u003cp\u003eBambu Lab's TPU for AMS is the grade intended for it. Softer flexible filaments should be fed from an external spool holder instead.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference from the H2S on its own?\u003c\/h3\u003e\n\u003cp\u003eOnly the AMS 2 Pro. The printer is identical — see the \u003ca href=\"\/products\/bambu-lab-h2s\"\u003estandalone H2S\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDo you support the H2S in Australia?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller and an authorised service and repair centre, with technical support and warranty assistance handled locally from Regents Park, Sydney.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications taken from Bambu Lab's official H2S spec sheet. Figures are subject to change by the manufacturer; check the current price and availability in the buy panel on this page.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995742474538,"sku":"PF003-S+SA007-AU1","price":2199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998424047914-ee1e62a1e52682f03d67d7b6b2e69679d9441ca8.jpg?v=1769702896"},{"product_id":"bambu-lab-h2s-laser-10w","title":"Bambu Lab H2S Laser Full Combo 10W","description":"\u003cp\u003e\u003cstrong\u003eThe Bambu Lab H2S Laser Full Combo 10W is the H2S Laser Edition with the 10 W laser module, the blade cutting module and an AMS 2 Pro\u003c\/strong\u003e — a large-format enclosed 3D printer, a laser engraver and cutter, and an automatic multi-colour system in one machine.\u003c\/p\u003e\n\u003cp\u003eBought from 3D BRO — a Bambu Lab authorised reseller and Australia's authorised service centre — with local warranty assistance and technical support from our Sydney team.\u003c\/p\u003e\n\u003ch2\u003eWhat the 10W laser is good at\u003c\/h2\u003e\n\u003cp\u003eTen watts is an engraving-first module. It marks wood, leather, anodised aluminium, card and painted surfaces cleanly at up to 400 mm\/s over a 310 × 260 mm area, and it will cut basswood plywood up to 5 mm. If your work is signage, personalisation, badges, packaging prototypes and light cutting, this is the right module.\u003c\/p\u003e\n\u003cp\u003eIf you need to cut thicker stock as a production step, the 40 W module on the \u003ca href=\"\/products\/bambu-lab-h2d-laser-full-combo-40w\"\u003eH2D Laser Full Combo\u003c\/a\u003e goes to 15 mm basswood at up to 1000 mm\/s. That is the honest dividing line between the two — not print quality, which is unaffected either way.\u003c\/p\u003e\n\u003cp\u003eThe separate blade cutting module handles what a laser should not: vinyl, sticker stock and card, with blade pressure adjustable from 50 to 600 gf, and it takes a pen holder for plotting.\u003c\/p\u003e\n\u003ch2\u003eStill a full large-format 3D printer\u003c\/h2\u003e\n\u003cp\u003eThe printing side is unchanged: a 340 × 320 × 340 mm build volume — the largest single-nozzle volume in the H2 family — with a 350°C hardened steel nozzle over a 120°C bed inside an actively heated 65°C chamber. That combination is what lets ABS, ASA, PC, PA and fibre-reinforced materials print at full height without warping. The included AMS 2 Pro adds four filament slots with drying.\u003c\/p\u003e\n\u003ch2\u003eSafety and ventilation\u003c\/h2\u003e\n\u003cp\u003eThe laser module is Class 4; the machine operates as a Class 1 system while the enclosure, door sensor and laser-safe window are intact and working. A safety key and emergency stop button are included, and a ventilation pipe is supplied. Laser work produces smoke and fumes: the machine has a built-in air pump and multi-stage filtration, but it should still be vented outdoors or into suitable extraction rather than run in a closed room. If you would like advice on the install for your space, contact our Sydney team before ordering.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003ch3\u003e3D printing\u003c\/h3\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e340 × 320 × 340 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEnclosed, active heating up to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported; hardened steel, all-metal hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, and carbon- or glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eLaser and cutting\u003c\/h3\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eLaser power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 W ± 1 W, semiconductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWavelength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e455 nm ± 5 nm blue light (engraving); 850 nm ± 5 nm infrared (height measurement)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpot size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.03 × 0.14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEngraving area\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e310 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLaser cutting area\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e297.5 × 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax engraving speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax cutting thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 mm (basswood plywood)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBlade cutting module\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e45° × 0.35 mm blade, 50–600 gf pressure, pen holder included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLaser safety class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClass 4 module; Class 1 as an enclosed system with protection intact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtraction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBuilt-in air pump, 30 kPa \/ 30 L\/min; 100 mm ventilation adapter supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir filtration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eG3 pre-filter, H12 HEPA, granulated coconut shell activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMachine\u003c\/h3\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e492 × 514 × 626 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 kg (printer; laser and cutting modules add to this)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch 720 × 1280 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (IEEE 802.11 a\/b\/g\/n). Wired Ethernet is not available on this model.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCameras\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLive view 1920 × 1080, toolhead 1600 × 1200, and the BirdsEye camera at 3264 × 2448 fitted to Laser Edition machines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded in this listing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eH2S Laser Edition printer, 10 W laser module, cutting module with pen holder, laser platform, cutting platform, safety key, emergency stop button, ventilation pipe, laser and cutting sample materials, build plate, spool holder, accessory box, and one \u003ca href=\"\/products\/bambu-lab-ams-2-pro\"\u003eAMS 2 Pro\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat can the 10W laser cut?\u003c\/h3\u003e\n\u003cp\u003eBambu Lab rates it to 5 mm in basswood plywood. Actual results vary with the material, its density and moisture content, and the number of passes. For thicker cutting, the \u003ca href=\"\/products\/bambu-lab-h2d-laser-full-combo-40w\"\u003e40 W H2D Laser Full Combo\u003c\/a\u003e is the machine to look at.\u003c\/p\u003e\n\u003ch3\u003eShould I buy the 10W or the 40W?\u003c\/h3\u003e\n\u003cp\u003eBuy the 10 W if you are mostly engraving and marking, with occasional thin cutting. Buy the 40 W if cutting is a production step and thickness or throughput is the constraint. Both print identically well.\u003c\/p\u003e\n\u003ch3\u003eDoes it need ventilation?\u003c\/h3\u003e\n\u003cp\u003eYes. It has a built-in air pump and filtration and ships with a ventilation pipe, but laser work should be vented outdoors or into suitable extraction.\u003c\/p\u003e\n\u003ch3\u003eCan I use it purely as a 3D printer?\u003c\/h3\u003e\n\u003cp\u003eYes. The laser and cutting modules are removable; with the print toolhead fitted it behaves as a standard \u003ca href=\"\/products\/bambu-lab-h2s\"\u003eH2S\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDo you support this machine in Australia?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller and an authorised service and repair centre, with technical support and warranty assistance handled locally from Regents Park, Sydney.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications taken from Bambu Lab's official H2S and H2S Laser Edition spec sheet. Figures are subject to change by the manufacturer; check the current price and availability in the buy panel on this page.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995303907626,"sku":"PF003-L+SA007-AU1","price":2499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998424211754-3fc1573d0151b7c492a6fec85ae53c335208efde.jpg?v=1769702902"},{"product_id":"bambu-lab-h2d-basic","title":"Bambu Lab H2D Basic","description":"\u003cp\u003e\u003cstrong\u003eThe Bambu Lab H2D is a large-format, enclosed dual-nozzle 3D printer for engineering parts, multi-material work and small-batch production.\u003c\/strong\u003e Two independent nozzles reach 350°C over a 120°C heatbed inside an actively heated 65°C chamber, which is what makes ABS, ASA, PC, PA and carbon- or glass-fibre reinforced materials practical rather than merely possible. This listing is the printer on its own, without an AMS.\u003c\/p\u003e\n\u003cp\u003eBought from 3D BRO — a Bambu Lab authorised reseller and Australia's authorised service centre — with local warranty assistance and technical support from our Sydney team.\u003c\/p\u003e\n\u003ch2\u003eWho the H2D is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the H2D if\u003c\/strong\u003e you print functional parts in engineering materials, need a build volume beyond 256 mm, or want two materials in one job without a purge-heavy single-nozzle workflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-h2d-combo\"\u003eH2D Combo\u003c\/a\u003e instead if\u003c\/strong\u003e you also want automatic multi-colour printing — it is the same printer with an AMS 2 Pro included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsider the \u003ca href=\"\/products\/bambu-lab-p1s\"\u003eP1S\u003c\/a\u003e or \u003ca href=\"\/products\/bambu-lab-p2s\"\u003eP2S\u003c\/a\u003e instead if\u003c\/strong\u003e you mainly print PLA and PETG at 256 mm or smaller and do not need a heated chamber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsider the \u003ca href=\"\/products\/bambu-lab-h2d-pro\"\u003eH2D Pro\u003c\/a\u003e instead if\u003c\/strong\u003e you want a tungsten carbide nozzle and wired Ethernet on the same chassis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy the heated chamber matters\u003c\/h2\u003e\n\u003cp\u003eMost desktop printers manage ABS and ASA by trapping whatever heat the bed gives off. The H2D actively heats the chamber to 65°C, which keeps the whole part near a consistent temperature as it grows. That is what reduces warping on tall parts and cracking between layers, and it is the single biggest reason an engineering-material print succeeds or fails.\u003c\/p\u003e\n\u003cp\u003eThe 350°C all-metal hotend and hardened steel nozzle extend the same logic to abrasive and high-temperature filaments — carbon- and glass-fibre reinforced PA, PET, PC and PPS are all on Bambu Lab's supported list for this machine.\u003c\/p\u003e\n\u003ch2\u003eDual nozzle, in practice\u003c\/h2\u003e\n\u003cp\u003eThe second nozzle is not only about colour. Assigning a support material to one nozzle and the model material to the other removes the purge tower that dominates single-nozzle multi-material printing, so a two-material job wastes a fraction of the filament it otherwise would. Combining a rigid material with TPU in one part is possible for the same reason.\u003c\/p\u003e\n\u003cp\u003eNote that the dual-nozzle build volume is slightly narrower than the single-nozzle volume — 300 mm versus 325 mm on the X axis — because the second toolhead needs room to park.\u003c\/p\u003e\n\u003ch2\u003eBambu Lab H2D key specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume, single nozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e325 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume, dual nozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal two-nozzle workspace\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEnclosed, active heating up to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported; hardened steel, all-metal hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax flow rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 mm³\/s standard hotend; 65 mm³\/s with the optional high-flow hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, and carbon- or glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild plates\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTextured PEI, Smooth PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e492 × 514 × 626 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e31 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch 720 × 1280 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (IEEE 802.11 a\/b\/g\/n), USB port, 8 GB built-in storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCameras\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLive view, nozzle and toolhead cameras, all 1920 × 1080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMulti-colour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSupports up to 4 × AMS 2 Pro and 8 × AMS HT (24 filament slots). AMS Lite is not compatible. No AMS is included with this listing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the H2D Basic and the H2D Combo?\u003c\/h3\u003e\n\u003cp\u003eThe printer is identical. The \u003ca href=\"\/products\/bambu-lab-h2d-combo\"\u003eH2D Combo\u003c\/a\u003e adds an AMS 2 Pro for automatic multi-colour and multi-material printing with filament drying. You can add an \u003ca href=\"\/products\/bambu-lab-ams-2-pro\"\u003eAMS 2 Pro\u003c\/a\u003e to this machine later.\u003c\/p\u003e\n\u003ch3\u003eDoes the H2D need a heated chamber for ABS and ASA?\u003c\/h3\u003e\n\u003cp\u003eIt has one. The chamber heats actively to 65°C, which is why ABS, ASA and fibre-reinforced engineering materials print reliably on this machine rather than needing workarounds.\u003c\/p\u003e\n\u003ch3\u003eCan the H2D print carbon fibre filament?\u003c\/h3\u003e\n\u003cp\u003eYes. The stock nozzle is hardened steel and the hotend is all-metal, so carbon- and glass-fibre reinforced materials are supported without a nozzle change.\u003c\/p\u003e\n\u003ch3\u003eHow is the H2D different from the H2D Pro?\u003c\/h3\u003e\n\u003cp\u003eSame chassis, build volume, temperatures, speed and cameras. The \u003ca href=\"\/products\/bambu-lab-h2d-pro\"\u003eH2D Pro\u003c\/a\u003e ships with a tungsten carbide nozzle instead of hardened steel and adds wired Ethernet; the H2D offers an optional high-flow hotend that the Pro sheet does not list.\u003c\/p\u003e\n\u003ch3\u003eDo you support the H2D in Australia?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller and an authorised service and repair centre, with technical support and warranty assistance handled locally from Regents Park, Sydney.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications taken from Bambu Lab's official H2D spec sheet. Figures are subject to change by the manufacturer; check the current price and availability in the buy panel on this page.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995305021738,"sku":"PF003-D-AU1","price":2499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/H2D_Basic.jpg?v=1767315537"},{"product_id":"bambu-lab-p2s-combo","title":"Bambu Lab P2S Combo","description":"\u003csection class=\"seo-buying-summary\" data-seo-batch=\"20260803\"\u003e\u003ch2\u003eBuy Bambu Lab P2S Combo in Australia\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab P2S Combo pairs the enclosed P2S printer with an AMS 2 Pro for automatic multi-colour printing, material management and filament drying. It is designed for makers, studios and small businesses that want a modern P-series workflow without buying the material system separately.\u003c\/p\u003e\n\u003cp\u003eOrder from 3D BRO for Sydney dispatch and local Australian support. If you prefer a standalone printer, \u003ca href=\"\/products\/bambu-lab-p2s\"\u003ecompare the Bambu Lab P2S\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n\u003ch2\u003eWhat you get over a P1S Combo\u003c\/h2\u003e\n\u003cp\u003eSame 256 mm build volume, same footprint on the bench, and four changes that matter:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened steel nozzle as standard\u003c\/strong\u003e — carbon- and glass-fibre reinforced filaments are supported, where the \u003ca href=\"\/products\/bambu-lab-p1s-combo\"\u003eP1S Combo\u003c\/a\u003e does not recommend them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynaSense servo extruder\u003c\/strong\u003e with roughly 70% more extrusion force and eddy-current flow sensing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive chamber airflow\u003c\/strong\u003e — the door stays closed for every material, warm air held in for ABS and ASA, cool air flushed through for PLA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-inch colour touchscreen and a 1080p 30 fps AI camera\u003c\/strong\u003e in place of a monochrome LCD and a 0.5 fps chamber camera.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlus 600 mm\/s instead of 500, and a 110°C bed instead of 100°C.\u003c\/p\u003e\n\u003ch2\u003eWhat the AMS 2 Pro adds\u003c\/h2\u003e\n\u003cp\u003eFour spools, fed automatically, so multi-colour models run unattended. The built-in drying matters as much as the colour count: PA, PET and PC absorb moisture from the air and print poorly once they have, and a heated AMS keeps them usable between jobs instead of needing a separate dryer.\u003c\/p\u003e\n\u003cp\u003eOne thing to plan for: the P2S has a single nozzle, so every colour change purges material into a waste tower. Multi-colour printing costs filament and time in a way it does not on a dual-nozzle machine — worth knowing before designing a twelve-colour model.\u003c\/p\u003e\n\u003ch2\u003eWho should choose the P2S Combo\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the P2S Combo if\u003c\/strong\u003e you want multi-colour printing plus the ability to run fibre-reinforced engineering filaments in a compact enclosed machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-p2s\"\u003estandalone P2S\u003c\/a\u003e if\u003c\/strong\u003e you already own a compatible AMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-p1s-combo-official-refurbished\"\u003eofficial refurbished P1S Combo\u003c\/a\u003e if\u003c\/strong\u003e budget is the priority and PLA, PETG and ABS cover your work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose an \u003ca href=\"\/products\/bambu-lab-h2s-combo\"\u003eH2S Combo\u003c\/a\u003e if\u003c\/strong\u003e you need a build volume past 256 mm or a genuinely heated chamber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBambu Lab P2S Combo key specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFully enclosed with active airflow management (no active chamber heater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported; hardened steel, tool-free quick swap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtruder\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynaSense servo extruder with eddy-current flow sensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, TPU, PET, PA, PC, PVA, support materials, and PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e392 × 406 × 478 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14.9 kg (printer only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch 854 × 480 colour touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual-band Wi-Fi (IEEE 802.11 a\/b\/g\/n). Wired Ethernet is not available on this model.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1920 × 1080 at 30 fps, with AI spaghetti and foreign-object detection and build-plate recognition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded in this listing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eP2S printer and one \u003ca href=\"\/products\/bambu-lab-ams-2-pro\"\u003eAMS 2 Pro\u003c\/a\u003e (4 slots, with drying)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many colours can the P2S Combo print?\u003c\/h3\u003e\n\u003cp\u003eFour with the included AMS 2 Pro, and more by adding further units. Because the P2S has a single nozzle, each change purges filament, so high colour counts cost material and time.\u003c\/p\u003e\n\u003ch3\u003eCan it print carbon fibre filament?\u003c\/h3\u003e\n\u003cp\u003eYes — the hardened steel nozzle is standard and fibre-reinforced grades are supported. Note that abrasive filaments are best run from an external spool rather than repeatedly through the AMS path.\u003c\/p\u003e\n\u003ch3\u003eDoes the AMS 2 Pro dry filament?\u003c\/h3\u003e\n\u003cp\u003eYes, drying is built in, which is what makes it worthwhile for PA, PET and PC.\u003c\/p\u003e\n\u003ch3\u003eIs the chamber heated?\u003c\/h3\u003e\n\u003cp\u003eNot actively. Airflow is managed so the door can stay closed for every material, but there is no chamber heating element. For that, look at the \u003ca href=\"\/products\/bambu-lab-h2s-combo\"\u003eH2S Combo\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDo you support the P2S in Australia?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller and an authorised service and repair centre, with technical support and warranty assistance handled locally from Regents Park, Sydney.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications taken from Bambu Lab's official P2S spec sheet. Figures are subject to change by the manufacturer; check the current price and availability in the buy panel on this page.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995306004778,"sku":"PF004-U+SA007-AU1","price":1149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998424670506-4ad2930f7013a815406b5cbc4e96d3f8ffa8b218.webp?v=1769703677"},{"product_id":"bambu-lab-p2s","title":"Bambu Lab P2S","description":"\u003csection class=\"seo-buying-summary\" data-seo-batch=\"20260803\"\u003e\u003ch2\u003eBuy Bambu Lab P2S in Australia\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab P2S is an enclosed desktop 3D printer built for fast, dependable printing with smarter automation and a hardened steel extrusion system. It is suited to makers and businesses that want an updated P-series platform for prototypes, functional parts and demanding materials.\u003c\/p\u003e\n\u003cp\u003eOrder from 3D BRO for Sydney dispatch and local Australian support. For automatic multi-colour printing and filament drying, \u003ca href=\"\/products\/bambu-lab-p2s-combo\"\u003ecompare the P2S Combo with AMS 2 Pro\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n\u003ch2\u003eWhat the P2S changes versus the P1S\u003c\/h2\u003e\n\u003cp\u003eThe P2S keeps the P1S build volume and price bracket and upgrades the parts that limited it. Four changes matter in practice:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened steel nozzle as standard.\u003c\/strong\u003e Carbon- and glass-fibre reinforced filaments — PLA-CF, PETG-CF, PA6-CF, PAHT-CF, PPA-CF, PET-CF — are on the supported list. On the \u003ca href=\"\/products\/bambu-lab-p1s\"\u003eP1S\u003c\/a\u003e they are not recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynaSense servo extruder.\u003c\/strong\u003e Roughly 70% more extrusion force with eddy-current flow sensing, which is what lets it push filament reliably at higher speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive chamber airflow.\u003c\/strong\u003e The P2S manages chamber temperature by moving air — trapping warm air for ABS and ASA, flushing cool air through for PLA — so you can leave the door closed for every material instead of opening it for PLA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA real screen and camera.\u003c\/strong\u003e A 5-inch colour touchscreen replaces the 2.7-inch monochrome LCD, and a 1080p 30 fps camera with AI spaghetti and foreign-object detection replaces the 720p 0.5 fps chamber camera.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is also faster — 600 mm\/s against 500 — and the bed runs to 110°C rather than 100°C.\u003c\/p\u003e\n\u003ch2\u003eWhat it does not do\u003c\/h2\u003e\n\u003cp\u003eThe chamber is not actively heated. Airflow management is not the same thing as a heating element: for very large ABS parts or high-temperature engineering materials, the actively heated 65°C chamber on the \u003ca href=\"\/products\/bambu-lab-h2s\"\u003eH2S\u003c\/a\u003e or \u003ca href=\"\/products\/bambu-lab-h2d-basic\"\u003eH2D\u003c\/a\u003e is a genuine step up. There is also no wired Ethernet on the P2S.\u003c\/p\u003e\n\u003ch2\u003eWho should choose the P2S\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the P2S if\u003c\/strong\u003e you want a compact enclosed printer that can run fibre-reinforced filaments, or if the touchscreen and AI failure detection are worth the difference over a P1S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-p2s-combo\"\u003eP2S Combo\u003c\/a\u003e if\u003c\/strong\u003e you want the AMS 2 Pro included for four-colour printing and filament drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the \u003ca href=\"\/products\/bambu-lab-p1s\"\u003eP1S\u003c\/a\u003e if\u003c\/strong\u003e you print PLA, PETG and ABS only and want the lower price.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose an H-series machine if\u003c\/strong\u003e you need a build volume past 256 mm or a genuinely heated chamber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBambu Lab P2S key specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34%;\"\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFully enclosed with active airflow management (no active chamber heater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax toolhead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported; hardened steel, tool-free quick swap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtruder\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynaSense servo extruder with eddy-current flow sensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, TPU, PET, PA, PC, PVA, support materials, and PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e392 × 406 × 478 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch 854 × 480 colour touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual-band Wi-Fi (IEEE 802.11 a\/b\/g\/n). Wired Ethernet is not available on this model.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1920 × 1080 at 30 fps, with AI spaghetti and foreign-object detection and build-plate recognition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMulti-colour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCompatible with AMS 2 Pro and AMS HT, multiple units supported. No AMS is included with this listing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan the P2S print carbon fibre filament?\u003c\/h3\u003e\n\u003cp\u003eYes. The stock nozzle is hardened steel and fibre-reinforced grades including PLA-CF, PETG-CF, PA6-CF, PAHT-CF and PET-CF are on the supported list. This is the main capability difference from the \u003ca href=\"\/products\/bambu-lab-p1s\"\u003eP1S\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs the P2S chamber heated?\u003c\/h3\u003e\n\u003cp\u003eNot actively. It manages chamber temperature by controlling airflow — holding warm air in for ABS and ASA, flushing cooler air through for PLA — which means the door can stay shut for every material. An actively heated chamber is an H-series feature.\u003c\/p\u003e\n\u003ch3\u003eIs the P2S worth the extra over a P1S?\u003c\/h3\u003e\n\u003cp\u003eIf you want fibre-reinforced materials, or you print unattended and want AI failure detection, yes. If you print PLA and PETG and occasionally ABS, the \u003ca href=\"\/products\/bambu-lab-p1s\"\u003eP1S\u003c\/a\u003e does the same job for less.\u003c\/p\u003e\n\u003ch3\u003eDoes the P2S work with my existing AMS?\u003c\/h3\u003e\n\u003cp\u003eIt is designed around the AMS 2 Pro and AMS HT. If you are moving from an older setup, contact us and we will confirm compatibility for your specific units before you order.\u003c\/p\u003e\n\u003ch3\u003eDo you support the P2S in Australia?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller and an authorised service and repair centre, with technical support and warranty assistance handled locally from Regents Park, Sydney.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications taken from Bambu Lab's official P2S spec sheet. Figures are subject to change by the manufacturer; check the current price and availability in the buy panel on this page.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995306168618,"sku":"PF004-U-AU","price":899.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998424834346-03c24a6b95574d3146b6af82a2a64b9b800f2628.webp?v=1769703682"},{"product_id":"bambu-lab-h2c-combo","title":"Bambu Lab H2C Combo","description":"\u003cp\u003e\u003cstrong\u003eBuy the Bambu Lab H2C Combo in Australia from 3D BRO — a Bambu Lab authorised reseller and authorised service centre — shipped from our Regents Park, Sydney warehouse.\u003c\/strong\u003e The current price and live availability are shown in the buy panel on this page. In-stock delivery orders are usually dispatched within 1 business day, and if the H2C is temporarily off the shelf you can still order it: we allocate your unit to the next inbound shipment, which typically ships within 3–4 business days. Sydney pickup is available after we confirm your order is ready.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the H2C if:\u003c\/strong\u003e you need large-format enclosed printing, several colours or functional materials in one job, and lower purge waste for advanced production work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsider an A1 or P1S instead if:\u003c\/strong\u003e you mainly print single-colour PLA, have limited workspace or want a lower-cost first 3D printer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuy locally with confidence:\u003c\/strong\u003e 3D BRO is a Bambu Lab authorised reseller and authorised service centre in Australia, with local warranty assistance, technical support and repair service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy the H2C stands out:\u003c\/strong\u003e its Vortek hotend-change system is designed to reduce repeated purging during colour and material changes, while its enclosed heated chamber supports large parts and compatible engineering materials.\u003c\/p\u003e\n\u003ch2\u003eWhat is the Bambu Lab H2C Combo?\u003c\/h2\u003e\n\u003cp\u003eThe H2C Combo is a large-format, enclosed multi-material 3D printer built around Bambu Lab’s Vortek hotend-change system. Six interchangeable induction hotends work with a second standard nozzle to reduce repeated purging during colour and material changes, while a 350°C nozzle, 120°C heatbed and 65°C actively heated chamber support demanding production workflows.\u003c\/p\u003e\n\u003ch2\u003eWhy choose the H2C?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower-purge multi-material printing:\u003c\/strong\u003e materials can remain assigned to separate hotends, reducing repeated nozzle cleaning and material waste during changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to seven materials in one print:\u003c\/strong\u003e six induction hotends plus the second standard nozzle support advanced colour, support and functional-material combinations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 24 managed filaments:\u003c\/strong\u003e expanded AMS configurations can manage up to 24 filaments; additional AMS units and matched hotends are required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge build capacity:\u003c\/strong\u003e up to 330 × 320 × 325 mm total two-nozzle workspace for large models and production parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering-material capability:\u003c\/strong\u003e the heated enclosure and high-temperature nozzle help control warping and layer adhesion with compatible technical materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated monitoring:\u003c\/strong\u003e multiple cameras and filament-path sensors help detect extrusion, feeding and print-start issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIs the H2C the right Bambu Lab printer for you?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the H2C if\u003c\/strong\u003e reducing purge waste, combining several colours or functional materials, printing large parts and maintaining an enclosed engineering workflow justify the higher purchase price.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsider another model if\u003c\/strong\u003e you mainly print PLA in one or two colours, have a smaller workspace or prioritise a lower upfront cost. Explore the \u003ca href=\"\/collections\/bambulab\"\u003eBambu Lab 3D printer collection\u003c\/a\u003e to compare alternatives available from 3D BRO Australia.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComparing advanced Bambu Lab models?\u003c\/strong\u003e Read our \u003ca href=\"\/pages\/bambu-lab-h2c-vs-x2d-australia\"\u003eBambu Lab H2C vs X2D Australia guide\u003c\/a\u003e for a practical comparison of build size, nozzle systems, materials and intended workflows.\u003c\/p\u003e\n\u003ch2\u003eBambu Lab H2C key specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinting system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVortek hotend-change system plus second standard nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSingle-nozzle build volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e305 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDual-nozzle build volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal two-nozzle workspace\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e330 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eActive chamber heating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDefault nozzle diameter options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.2, 0.4, 0.6 and 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat is included, and what else may be required?\u003c\/h2\u003e\n\u003cp\u003eThis listing is the \u003cstrong\u003eH2C AMS Combo\u003c\/strong\u003e configuration. The maximum seven-hotend and 24-filament workflow requires additional AMS units and matched hotends. Optional 10W or 40W laser and cutting modules are not included unless explicitly selected. Packages may arrive separately. Contact 3D BRO before ordering if you want us to confirm the exact configuration for your intended materials or colour workflow.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the Bambu Lab H2C in stock in Australia?\u003c\/h3\u003e\n\u003cp\u003eLive availability is shown in the buy panel on this page. We hold H2C stock at our Regents Park, Sydney warehouse and dispatch in-stock delivery orders within about 1 business day. If it is temporarily off the shelf you can still order it — we restock Bambu Lab hardware more often than most Australian sellers and allocate your unit to the next inbound shipment, which typically ships within 3–4 business days.\u003c\/p\u003e\n\u003ch3\u003eHow much is the Bambu Lab H2C Combo in Australia?\u003c\/h3\u003e\n\u003cp\u003eThe current price, GST included, is shown in the buy panel on this page and is the price that applies at checkout. Promotional pricing changes from time to time, so use the figure on this page rather than one quoted elsewhere.\u003c\/p\u003e\n\u003ch3\u003eIs 3D BRO an authorised Bambu Lab reseller?\u003c\/h3\u003e\n\u003cp\u003eYes. 3D BRO is a Bambu Lab authorised reseller in Australia and an authorised service and repair centre, providing local sales, technical assistance and after-sales support.\u003c\/p\u003e\n\u003ch3\u003eHow many colours or materials can the H2C print?\u003c\/h3\u003e\n\u003cp\u003eThe H2C can combine up to seven colours or materials in one print through its hotend system. With an expanded AMS setup it can manage up to 24 filaments, but the exact number available in a job depends on the installed AMS units, hotends and material compatibility.\u003c\/p\u003e\n\u003ch3\u003eIs the H2C suitable for engineering filaments?\u003c\/h3\u003e\n\u003cp\u003eIts 350°C nozzle, 120°C heatbed and 65°C active chamber are designed for a broad range of compatible engineering materials. Always check the selected nozzle and filament requirements before printing abrasive or high-temperature materials.\u003c\/p\u003e\n\u003ch3\u003eCan I collect the H2C in Sydney?\u003c\/h3\u003e\n\u003cp\u003eYes. Pickup is available from 3D BRO in Regents Park, Sydney after we confirm that your order is ready.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eTechnical specifications checked against \u003ca href=\"https:\/\/blog.bambulab.com\/bambu-lab-h2c-where-multi-material-vortek-system-meets-engineering-precision\/\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab’s official H2C product information\u003c\/a\u003e. Price and availability can change; the buy panel on this page and the checkout always show the current figures.\u003c\/small\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50995306430762,"sku":"PF003-C+SA007-AU","price":3199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/9998425030954-1fcf177f5a1a375986f25cfba031733032069245.webp?v=1769703688"},{"product_id":"bambu-lab-p1s-combo-official-refurbished","title":"Bambu Lab P1S Combo Official Refurbished 3D Printer","description":"\u003ch3 class=\"text-base font-semibold mt-3 pt-6 mb-3 text-zinc-800 dark:text-zinc-200 first:mt-0 first:pt-0 tracking-tight\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eBambu Lab P1S Combo (Official Refurbished) – High-Speed Multi-Color 3D Printing\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"mt-3 mb-4 leading-[1.85]\"\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eBambu Lab P1S Combo (Official Refurbished)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a manufacturer-certified, high-speed enclosed 3D printer bundle. It includes the\u003cspan\u003e \u003c\/span\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eAMS (Automatic Material System)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor seamless multi-color printing. This unit is factory-tested to meet original performance standards and comes with a full\u003cspan\u003e \u003c\/span\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003e12-month warranty\u003c\/strong\u003e, offering the same reliability and speed as a brand-new machine at a significantly lower price point.\u003c\/p\u003e\n\u003chr class=\"my-8 border-zinc-200\/80 dark:border-zinc-700\/80\"\u003e\n\u003ch3 class=\"text-base font-semibold mt-3 pt-6 mb-3 text-zinc-800 dark:text-zinc-200 first:mt-0 first:pt-0 tracking-tight\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eWhat \"Official Refurbished\" Means\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"mt-3 mb-4 leading-[1.85]\"\u003eAn\u003cspan\u003e \u003c\/span\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eOfficial Refurbished\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eunit is a machine that has been returned to the manufacturer, thoroughly inspected, and certified by\u003cspan\u003e \u003c\/span\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eBambu Lab\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003etechnicians.\u003c\/p\u003e\n\u003cul class=\"my-5 space-y-3 leading-[1.85] pl-5\"\u003e\n\u003cli class=\"leading-[1.85] pl-1\"\u003e\n\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eFactory Certified\u003c\/strong\u003e: Every unit is tested by the original manufacturer to ensure it meets factory-grade performance and safety standards.\u003c\/li\u003e\n\u003cli class=\"leading-[1.85] pl-1\"\u003e\n\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003ePerformance Tested\u003c\/strong\u003e: Verified for high-speed printing (500mm\/s), vibration compensation, and cooling efficiency.\u003c\/li\u003e\n\u003cli class=\"leading-[1.85] pl-1\"\u003e\n\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eFull 12-Month Warranty\u003c\/strong\u003e: Includes the exact same\u003cspan\u003e \u003c\/span\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003e12-month warranty\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eas a brand-new unit, providing total peace of mind for Australian customers.\u003c\/li\u003e\n\u003cli class=\"leading-[1.85] pl-1\"\u003e\n\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eSame-As-New Experience\u003c\/strong\u003e: While minor cosmetic scuffs may be present on the casing, the internal hardware and printing performance are identical to a new unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr class=\"my-8 border-zinc-200\/80 dark:border-zinc-700\/80\"\u003e\n\u003ch3 class=\"text-base font-semibold mt-3 pt-6 mb-3 text-zinc-800 dark:text-zinc-200 first:mt-0 first:pt-0 tracking-tight\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"my-5 relative flex-1 min-h-0 min-w-0 hover:cursor-default overflow-x-auto overflow-y-hidden phoenix-scrollbar\"\u003e\n\u003cdiv\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2 bg-zinc-50 dark:bg-zinc-800\/80 font-semibold text-left text-zinc-700 dark:text-zinc-300\"\u003eSpecification\u003c\/th\u003e\n\u003cth class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2 bg-zinc-50 dark:bg-zinc-800\/80 font-semibold text-left text-zinc-700 dark:text-zinc-300\"\u003eTechnical Detail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eMax Printing Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eMax Acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eBuild Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003e256 x 256 x 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eChassis \u0026amp; Enclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003eFully Enclosed (Steel \u0026amp; Glass)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eAMS Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003eIncluded (Supports 4-color printing, expandable to 16)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eFilament Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003ePLA, PETG, TPU, ABS, ASA, PVA, PET, Carbon\/Glass Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eSensors \u0026amp; Camera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border border-zinc-200 dark:border-zinc-700 px-3 py-2\"\u003e720p Chamber Camera, Power Loss Recovery, Filament Runout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr class=\"my-8 border-zinc-200\/80 dark:border-zinc-700\/80\"\u003e\n\u003ch3 class=\"text-base font-semibold mt-3 pt-6 mb-3 text-zinc-800 dark:text-zinc-200 first:mt-0 first:pt-0 tracking-tight\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eWhat’s in the Box? (Same as Brand New)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"mt-3 mb-4 leading-[1.85]\"\u003eThe Official Refurbished Bambu Lab P1S Combo includes the complete accessory kit provided with new units:\u003c\/p\u003e\n\u003cul class=\"my-5 space-y-3 leading-[1.85] pl-5\" data-spm-anchor-id=\"4e67c6a7.3b2da8b8.0.i6.25f976cf8HhY8C\"\u003e\n\u003cli class=\"leading-[1.85] pl-1\"\u003eBambu Lab P1S 3D Printer (Official Refurbished)\u003c\/li\u003e\n\u003cli class=\"leading-[1.85] pl-1\"\u003eBambu Lab AMS (Automatic Material System)\u003c\/li\u003e\n\u003cli class=\"leading-[1.85] pl-1\"\u003eDouble-Sided Textured PEI Plate\u003c\/li\u003e\n\u003cli class=\"leading-[1.85] pl-1\"\u003eAccessories Box\u003c\/li\u003e\n\u003cli class=\"leading-[1.85] pl-1\"\u003ePower Cord and AMS Connection Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr class=\"my-8 border-zinc-200\/80 dark:border-zinc-700\/80\"\u003e\n\u003ch3 class=\"text-base font-semibold mt-3 pt-6 mb-3 text-zinc-800 dark:text-zinc-200 first:mt-0 first:pt-0 tracking-tight\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eExpert FAQ \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"mt-3 mb-4 leading-[1.85]\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eQ: Is the warranty different for refurbished units?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo. Bambu Lab provides a full\u003cspan\u003e \u003c\/span\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003e12-month warranty\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon all Official Refurbished units, exactly the same as our brand-new printers.\u003c\/p\u003e\n\u003cp class=\"mt-3 mb-4 leading-[1.85]\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eQ: Does it include the AMS system?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYes. As a \"Combo\" unit, it includes the complete AMS system for multi-color printing and automated filament management.\u003c\/p\u003e\n\u003cp class=\"mt-3 mb-4 leading-[1.85]\" data-spm-anchor-id=\"4e67c6a7.3b2da8b8.0.i5.25f976cf8HhY8C\"\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eQ: Why choose Official Refurbished over a used printer?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong class=\"font-semibold text-zinc-900 dark:text-zinc-100\"\u003eA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOfficial Refurbished units are factory-vetted by Bambu Lab, updated with the latest firmware, and backed by a professional warranty and local support from 3D BRO, which used\/second-hand sales cannot offer.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":51014121750826,"sku":"PF001-U+SA001-AURF","price":699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/10004093108522-90c1bfac9b501b4a4f630457b3f8d470c1639221.webp?v=1769703750"},{"product_id":"bambu-lab-x2d-combo","title":"Bambu Lab X2D Combo","description":"\u003cp\u003e\u003cstrong\u003eThe Bambu Lab X2D Combo is a compact enclosed dual-nozzle 3D printer for Australian makers, educators, professionals and small businesses that want cleaner supports, practical multi-material printing and engineering-material capability without moving to a larger-format machine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e functional prototypes, dedicated support interfaces, rigid-and-flexible parts, classroom or studio use and users who value local authorised support in Australia.\u003c\/p\u003e\n\u003ch2\u003eWhy choose the Bambu Lab X2D Combo?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical dual-nozzle switching:\u003c\/strong\u003e dedicate one nozzle to the model and the other to support or a second material for cleaner overhangs and easier support removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore efficient multi-material printing:\u003c\/strong\u003e use compatible material combinations with less purge waste than repeated single-nozzle colour changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligent thermal control:\u003c\/strong\u003e cool mode supports crisp PLA details, while heat mode reaches a 65°C active chamber for stronger engineering-material layer adhesion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAI-assisted reliability:\u003c\/strong\u003e 31 sensors monitor the filament path, thermal environment and machine safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor-workspace design:\u003c\/strong\u003e three-stage filtration combines a G3 pre-filter, H12 HEPA filter and activated carbon layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact performance:\u003c\/strong\u003e a 256 × 256 × 260 mm maximum workspace fits common desktop production and education workflows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBambu Lab X2D key specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinting system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMechanical-switching dual-nozzle extrusion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain-nozzle build volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDual-nozzle intersection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e235.5 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal two-nozzle workspace\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum heatbed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eActive chamber heating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFiltration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eG3 pre-filter, H12 HEPA and activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNoise level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBelow 50 dB under the manufacturer's stated conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWho should buy the X2D?\u003c\/h2\u003e\n\u003cp\u003eChoose the X2D when you want a compact Bambu Lab printer with a dedicated second nozzle for supports or secondary materials. It is especially useful for prototypes with complex overhangs, dissolvable or breakaway support workflows, flexible-and-rigid combinations, and engineering parts that benefit from active chamber heating.\u003c\/p\u003e\n\u003ch2\u003eWhy buy Bambu Lab X2D from 3D BRO?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab authorised reseller in Australia\u003c\/li\u003e\n\u003cli\u003eAuthorised service and repair support\u003c\/li\u003e\n\u003cli\u003eLocal Sydney technical assistance and Regents Park pickup\u003c\/li\u003e\n\u003cli\u003eGenuine Australian stock and after-sales support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the main benefit of the X2D dual-nozzle system?\u003c\/h3\u003e\n\u003cp\u003eOne nozzle can print the main model while the other handles support or a compatible secondary material. This can improve supported surfaces, reduce post-processing and make multi-material parts easier to produce.\u003c\/p\u003e\n\u003ch3\u003eCan the X2D print engineering materials?\u003c\/h3\u003e\n\u003cp\u003eYes. The 300°C nozzle, 120°C heatbed and 65°C active chamber support many demanding materials. Check the main and auxiliary hotend compatibility lists before selecting a filament.\u003c\/p\u003e\n\u003ch3\u003eIs the X2D suitable for home, school or studio use?\u003c\/h3\u003e\n\u003cp\u003eIts enclosed design, three-stage filtration, sensor network and sub-50 dB positioning make it suitable for many indoor environments when operated with appropriate materials and ventilation.\u003c\/p\u003e\n\u003ch3\u003eWhere can I buy the Bambu Lab X2D Combo in Australia?\u003c\/h3\u003e\n\u003cp\u003eYou can order the X2D Combo online from 3D BRO or arrange pickup and local support through our Sydney locations.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eSpecifications verified against \u003ca href=\"https:\/\/blog.bambulab.com\/xcellence-made-simple-bambu-lab-presents-the-x2d\/\" target=\"_blank\" rel=\"noopener\"\u003eBambu Lab's official X2D technical information\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStill comparing models?\u003c\/strong\u003e Read our \u003ca href=\"\/pages\/bambu-lab-h2c-vs-x2d-australia\"\u003eBambu Lab H2C vs X2D Australia guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":51397959844138,"sku":"PF004-P+SA007-AU","price":1349.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/X2DCombo.jpg?v=1776173885"},{"product_id":"bambu-lab-x2d","title":"Bambu Lab X2D","description":"\u003cp\u003e\u003cstrong\u003eXcellence made simple.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBambu Lab X2D\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a next-generation\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003edual nozzle 3D printer\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebuilt for makers, professionals, educators, and small businesses who want cleaner supports, smarter multi-material printing, and stronger engineering performance in a compact enclosed machine.\u003c\/p\u003e\n\u003cp\u003eWith a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003edual nozzle system\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esmart thermal control\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAI-powered monitoring\u003c\/strong\u003e, and advanced motion technology, the X2D is designed to make high-quality printing more efficient, more consistent, and easier to manage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy Bambu Lab X2D in Australia from 3D BRO PTY LTD\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBambu Lab authorised reseller\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAustralia’s authorised service centre\u003c\/strong\u003e, with local technical support from our Sydney team.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the Bambu Lab X2D?\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab X2D is designed for users who need more than a standard single-nozzle desktop printer. Its dual-nozzle architecture helps you print complex geometries more efficiently, reduce support waste, and unlock more advanced material combinations.\u003c\/p\u003e\n\u003cp\u003eWhether you are printing functional prototypes, visual models, flexible-and-rigid combinations, or engineering-grade parts, the X2D gives you more control over print quality, material efficiency, and final part performance.\u003c\/p\u003e\n\u003ch2\u003eDual Nozzle System\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth surface made simple.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe X2D uses a dual nozzle design that allows one nozzle to focus on the main part while the auxiliary nozzle handles support or secondary material. This helps create cleaner overhangs, easier support removal, and less post-processing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnlock versatility with multi-material printing.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe dual nozzle system also makes it easier to combine materials such as PLA and TPU in a single job, opening up more functional and creative applications while reducing waste compared with traditional purge-heavy workflows.\u003c\/p\u003e\n\u003ch2\u003eSmart Thermal Control System\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCool mode for crisp details.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe X2D draws in fresh cooling air and expels warm air to maintain consistent air exchange, helping overhangs, bridges, and fine details print more cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeat mode for stronger layer adhesion.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWith a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e300°C nozzle\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e65°C actively heated chamber\u003c\/strong\u003e, the X2D is built to support high-performance materials and improve layer bonding on large engineering parts while reducing warping.\u003c\/p\u003e\n\u003ch2\u003eBambu Lab 2nd-Gen 3D Printing Technology\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePMSM Servo System.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe X2D is designed to smooth out extrusion pressure fluctuations in real time, helping reduce visible surface artefacts and improve print finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVision Encoder.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMechanical drift and belt stretch can affect long-term accuracy. The X2D platform is designed to maintain high positional precision across the build volume for more reliable printing over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Filament Path AI Detection.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA network of sensors monitors the feed path, print process, thermal environment, and machine safety in real time, helping detect issues earlier and improve print reliability.\u003c\/p\u003e\n\u003ch2\u003eBambu Algorithms for Better Print Quality\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFlow Dynamics Calibration.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe X2D dynamically calibrates extrusion behaviour in real time to help deliver smoother surfaces and sharper edges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eActive Vibration Compensation.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRinging and ghosting can blur details at high speed. The X2D is designed to compensate for vibration in real time so prints stay cleaner and more accurate.\u003c\/p\u003e\n\u003ch2\u003eDesigned for Home, Studio, and Professional Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eUL-2904 Certified Clean Air.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe X2D is presented as suitable for indoor use with supported materials, making it easier to integrate into home and workspace environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3-Stage Filtration System.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA G3 pre-filter, H12 HEPA filter, and activated carbon layer help reduce odours and airborne particles during printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuiet Printing.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWith active motor noise cancelling and a noise-optimised air duct, the X2D is designed for quieter day-to-day operation.\u003c\/p\u003e\n\u003ch2\u003eBambu Lab X2D Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild Volume (Main Nozzle)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild Volume (Dual Nozzle Printing)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e235.5 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal Volume for Two Nozzles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhysical Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e392 × 406 × 478 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16.25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight with AMS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.88 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Nozzle Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Heatbed Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Chamber Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Toolhead Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Toolhead Acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSupported Filaments\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMain Hotend:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA\/PETG, Support for ABS, Support for PA\/PET, PET, PA, PC, PVA, Carbon\/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PPA, PET\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAuxiliary Hotend:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePLA (excluding PLA Aero), PETG, ABS, ASA, TPU for AMS, Support for PLA, Support for PLA\/PETG, Support for ABS, Support for PA\/PET, PET, PA, PC, PVA, Carbon\/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PET\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint with caution:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePLA Silk, PETG-CF, ASA-CF, PA6-CF, TPU for AMS, Support for PA\/PET\u003c\/p\u003e\n\u003ch2\u003eWhy Buy Bambu Lab X2D from 3D BRO?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBambu Lab authorised reseller in Australia\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAustralia’s authorised service centre\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLocal Sydney technical support\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGenuine products and after-sales support\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFast help with setup, troubleshooting, and maintenance\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e3D BRO PTY LTD\u003c\/strong\u003e\u003cbr\u003e6 Rose Crescent, Regents Park, NSW 2143\u003cbr\u003ePhone: (02) 9772 4315\u003cbr\u003eSales: sales@3dbro.com.au\u003cbr\u003eSupport: support@3dbro.com.au\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the Bambu Lab X2D?\u003c\/h3\u003e\n\u003cp\u003eThe Bambu Lab X2D is a compact enclosed dual nozzle 3D printer designed for multi-material printing, dedicated support printing, smarter thermal control, and AI-assisted monitoring.\u003c\/p\u003e\n\u003ch3\u003eWhat are the benefits of a dual nozzle 3D printer?\u003c\/h3\u003e\n\u003cp\u003eA dual nozzle 3D printer can use one nozzle for the model material and the other for support or secondary material. This helps reduce waste, improve support quality, and expand material options.\u003c\/p\u003e\n\u003ch3\u003eIs the Bambu Lab X2D suitable for engineering materials?\u003c\/h3\u003e\n\u003cp\u003eYes. Based on the supplied brochure specifications, the X2D offers a 300°C nozzle, 120°C heatbed, and 65°C active chamber heating, making it suitable for more demanding material applications.\u003c\/p\u003e\n\u003ch3\u003eIs the Bambu Lab X2D good for home use?\u003c\/h3\u003e\n\u003cp\u003eThe X2D is designed to be more home-friendly thanks to its enclosed structure, filtration system, quiet operation, and indoor air quality positioning.\u003c\/p\u003e\n\u003ch3\u003eWhere can I buy Bambu Lab X2D in Australia?\u003c\/h3\u003e\n\u003cp\u003eYou can buy the Bambu Lab X2D in Australia from 3D BRO, a Bambu Lab authorised reseller with local support and service in Sydney.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":51424216645930,"sku":"PF004-P-AU","price":1049.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/10095773876522-188619be37dd05b3b66e791987af22a8474f3a38.webp?v=1785935608"},{"product_id":"bambu-lab-a2l-3d-printer","title":"Bambu Lab A2L 3D Printer","description":"\u003ch2\u003eBambu Lab A2L — large-format printing without the large-format price\u003c\/h2\u003e\n\u003cp\u003eThe A2L gives you a \u003cstrong\u003e330 × 320 × 325 mm\u003c\/strong\u003e build volume — roughly double the usable space of a 256 mm class machine — in an open-frame printer aimed at makers rather than engineers. A full-size helmet in one piece, or a tray of forty small parts in one run, without slicing the model into sections.\u003c\/p\u003e\n\u003cp\u003eSold and supported by 3D BRO, a certified Bambu Lab reseller and one of the first officially authorised Bambu Lab service and repair centres in Australia. Dispatched from our Regents Park warehouse in Sydney.\u003c\/p\u003e\n\n\u003ch3\u003eTwo versions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA2L\u003c\/strong\u003e — the printer on its own. Single colour, single material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA2L Combo\u003c\/strong\u003e — the printer plus the AMS unit for automatic multi-colour and multi-material printing. Choose this if you want colour changes without standing over the machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCurrent prices for both are shown above. Buying the Combo up front costs less than adding the AMS later.\u003c\/p\u003e\n\n\u003ch3\u003eWho this suits — and who it does not\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA good fit if\u003c\/strong\u003e you print large cosplay pieces, helmets, terrain, batches of small parts, or anything you are currently slicing into sections to fit a smaller bed; you work mainly in PLA and PETG; and you want the biggest build area you can get at this price.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLook at an enclosed P or H series machine instead if\u003c\/strong\u003e you need ABS, ASA, PC or nylon. The A2L is open-frame with an 80 °C heatbed, and Bambu Lab does not list those materials for it — see the material table below. Carbon-fibre PLA and PETG are supported but need a hardened steel nozzle, sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eA2L\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e330 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis\u003c\/td\u003e\n\u003ctd\u003eAluminium and steel, plastic outer frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax heatbed temperature\u003c\/td\u003e\n\u003ctd\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eStainless steel; 0.2 \/ 0.4 \/ 0.6 \/ 0.8 mm supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003eHardened steel gears, servo extruder motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament cutter\u003c\/td\u003e\n\u003ctd\u003eBuilt-in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild plate\u003c\/td\u003e\n\u003ctd\u003eFlexible steel, Textured PEI included. Also supports Engineering Plate and Cool Plate SuperTack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax toolhead speed\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax toolhead acceleration\u003c\/td\u003e\n\u003ctd\u003e10 m\/s² (10,000 mm\/s²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax hot end flow\u003c\/td\u003e\n\u003ctd\u003e28 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e3.5 inch 240 × 320 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, Bambu-Bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003e32 GB microSD card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera\u003c\/td\u003e\n\u003ctd\u003eLow frame rate, up to 1080p, timelapse supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensors\u003c\/td\u003e\n\u003ctd\u003eFilament run-out, filament tangle, filament odometry, power loss recovery, clumping detection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e544 × 529 × 505 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e12.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e200–240 VAC, 50\/60 Hz, 1000 W (Australian high-voltage version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating environment\u003c\/td\u003e\n\u003ctd\u003e15–30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSource: Bambu Lab official A2L technical specifications.\u003c\/p\u003e\n\n\u003ch3\u003eMaterials — what it is rated for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRating\u003c\/th\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable for printing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable with a hardened steel nozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA-CF, PETG-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNot listed by Bambu Lab\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABS, ASA, PC, PA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis is Bambu Lab's own rating. The A2L has no enclosure and an 80 °C bed, so high-shrinkage and high-temperature materials are not part of its design envelope. If those matter to you, talk to us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eDelivery, warranty and support\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDispatched from our Regents Park warehouse in Sydney, Monday to Saturday. Delivery is typically 1–3 business days within Australia depending on your address.\u003c\/li\u003e\n\u003cli\u003e3D printers are not included in free shipping. Delivery is $15 per printer within the Sydney area and $30 per printer to the rest of Australia.\u003c\/li\u003e\n\u003cli\u003eCovered by the official Bambu Lab warranty. As an authorised Bambu Lab service and repair centre, we assess and repair locally in Sydney rather than sending machines overseas.\u003c\/li\u003e\n\u003cli\u003eLocal pickup is available — check the current pickup options at checkout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow much bigger is the A2L than an A1 or P1S?\u003c\/strong\u003e\u003cbr\u003eThe A2L build volume is 330 × 320 × 325 mm against 256 × 256 × 256 mm on the A1 and P1S — roughly double the usable volume.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I buy the A2L or the A2L Combo?\u003c\/strong\u003e\u003cbr\u003eBuy the Combo if you want multi-colour or multi-material prints. If you print in one colour at a time, the standalone A2L does the same job for less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it print ABS or ASA?\u003c\/strong\u003e\u003cbr\u003eBambu Lab does not list ABS, ASA, PC or nylon for the A2L. It is an open-frame machine with an 80 °C bed. For those materials you want an enclosed printer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it print carbon fibre filament?\u003c\/strong\u003e\u003cbr\u003ePLA-CF and PETG-CF are supported, but you need a hardened steel nozzle. The stainless nozzle supplied will wear quickly on abrasive filament.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"A2L","offer_id":51604906443050,"sku":"PF005-L-AU","price":649.0,"currency_code":"AUD","in_stock":true},{"title":"A2L Combo","offer_id":51604906475818,"sku":"PF005-L+SA005-AU","price":849.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/files\/10152824471850-08c8333e84e80998a202be287594ba79663df206.webp?v=1785935676"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3065\/9626\/collections\/c640_ea7759a0ae0740414218802152a1a89e_28896ea8-5e11-441b-8768-8cc46ef08868.webp?v=1769702766","url":"https:\/\/3dbro.com.au\/collections\/3d-printer\/ams.oembed","provider":"3D BRO","version":"1.0","type":"link"}